Bug Reports

Missing NWS Model

TheRadarGuy — Fri, 16 Oct 2026 19:37:15 GMT

@tslockbo This has already been discussed a few times: https://community.windy.com/topic/45981/nam https://community.windy.com/topic/45966/nam-for-alaska https://community.windy.com/topic/46029/nam-missing-from-menu The NAM, as well as several other legacy models are being retired by NOAA in favour of a new model called RRFS. Windy is currently in the process of adding the RRFS data, however I am not aware of exactly when that will be finished. For now I recommend using HRRR until RRFS is implemented. https://www.weather.gov/media/notification/pdf_2026/scn26-048_Updated_RRFS_and_REFS_Implementation_aae.pdf https://www.weather.gov/media/notification/pdf_2026/scn26-47_Updated_Retirement_of_NAM_SREF_HREF_HiresW_NAM_MOS_aac.pdf https://www.weather.gov/media/notification/pdf_2026/scn26-89_RRFS_Downstream.pdf

Windy times sliding around when importing routes and soundings start at 1000 hPa

ITPSwx1 — Wed, 14 Oct 2026 21:25:22 GMT

Hello all,

I have two things to mention.

My colleagues and I have ran into an issue where when we input routes from flight plans into your software that the times slide around. Is there a way to address that issue?
We noticed that the regular soundings always start at 1000 hPa. For now we have been using the Windy plug ins again as a work around, but is there a time frame when that will be fixed? Thank you!

Why are you changing the names of the seas?

TheRadarGuy — Wed, 14 Oct 2026 05:04:07 GMT

@nzmshn Windy uses a third party map provider called OpenStreetMap. Also, the Levantine Sea is the legitimate name for the easternmost Mediterranean Sea, when I check Windy, it still shows the main part of the Mediterranean as the Mediterranean Sea: https://en.wikipedia.org/wiki/Levantine_Sea

Map layers fail to render on Firefox – @leafletGl importmap not resolved

frankf471 — Tue, 13 Oct 2026 08:41:51 GMT

Hi,

Windy is not rendering any map layers in Firefox. The issue is consistent in normal browsing mode but does not occur in a private window. The site works fine in Chrome and Edge.

Console error:

Uncaught TypeError: L'identificatore "@leafletGl" è un identificatore "bare", ma non è stata rieseguita la mappatura verso alcun modulo.

(Translation: The identifier "@leafletGl" is a "bare" identifier, but no mapping to any module was found.)

Details:

Firefox version: [X]

OS: [Windows / macOS / Linux]

Reproducible: always in normal mode, never in private window

Extensions disabled, cache/cookies cleared, privacy.resistFingerprinting = false, WebGL confirmed working via about:support

Suspected cause:
The

I can’t stop Mblue AI

idefix37 — Tue, 13 Oct 2026 06:57:41 GMT

@marine40 Are you getting this issue with the browser version or the mobile app?

Wind station direction should be rounded

swrobel — Mon, 12 Oct 2026 20:47:59 GMT

This seems unnecessarily precise. https://www.windy.com/station/madis-514SE?33.985,-118.966,11,p:wind

Windy 51.3.2 on iOS 27.0.1

App Freezes on Launch for Windy iOS v51.030224

idefix37 — Sun, 11 Oct 2026 09:17:46 GMT

@fpdk It could be due to the old 16.1 version of OS. You should try to update your iPhone 13 Pro Max to iOS 27 (if my information is right).

Unable to show Clear Air Turbulence above FL300

Suty — Fri, 09 Oct 2026 22:53:06 GMT

@Mike-Meddings Hello, we are releasing the new updated version 51.3.2, where the issue is solved and the scale is extended. It should be available for all users in these days.

Nolo hurricane track looks wonky

jcalvert — Fri, 09 Oct 2026 09:25:41 GMT

Hello,

I just noticed that the Nolo hurricane track looks wonky.

When the radar is opened, the application closes.

Suty — Fri, 09 Oct 2026 01:56:15 GMT

@Daniil-Vedinov Hello, our colleagues made some fixed in the new version, which is planned to be released during the next week. Can you check the update and let me know, if the issue persists. It is version 51.3.2.

Weather Radar Crashing When I Zoom In

schilpat — Thu, 08 Oct 2026 23:39:07 GMT

@Cirkzz Hi, thank you for the report. Could you give us more information to help us troubleshoot the problem? for how long have you been experiencing this issue does it also happen on the satellite layer does it happen exclusively only during zoom, or is it possible to make the app crash during panning / playing animation could you verify the behaviour also in browser what device and os version do you have Thank you!

Wind model on forecast panel and map not in sync

idefix37 — Thu, 08 Oct 2026 20:01:51 GMT

@Ludwighaffen The Meteoblue model cannot be used to generate the map because its data is not provided on a grid of points. Therefore, Meteoblue cannot possibly be the data source for the map; this is a labeling error. The map likely comes from the model listed at the top of the table: ECMWF. This need to be fixed. The source of the bottom panel is the different models displayed in this panel.

iOS app does not remember 1 hour forecast setting

idefix37 — Thu, 08 Oct 2026 19:45:07 GMT

@Mihai-Codoban This should be fixed in the next version.

Freezing at zoomed in scale

Suty — Thu, 08 Oct 2026 15:11:50 GMT

@scott-nunnery Hello, can you tell me more about the configuration you are using? Device, model, OS version, Windy version, etc.?

Radar jumpy in Sweden

Filip_K — Thu, 08 Oct 2026 09:31:06 GMT

Hi @Spacemani, fixed from now on. The reason behind the issue was that used data were constantly switching between two used sources (Swedish SHMI and Norwegian met.no). The data are slightly different thus the breathing/pulsating behavior.

Live flashes visible but lightning strike symbols not rendered on Android app

Mandy Lindsay — Thu, 08 Oct 2026 06:51:40 GMT

@Paulair Same issue on my S26 ultra but works fine on my S25 fe Any idea when it will be fixed

Settings on location fcst - misbehaving on desktop

Suty — Wed, 07 Oct 2026 20:08:23 GMT

@Wheats @idefix37 Okay, I found the issue, thank you for all info provided. It seems that if the forecast changes the model for any reason (Waves and Tides or Air Quality tab), when you go back it ignores the setup of the default and it automatically reverts to MBlue AI. I will forward the issue to colleagues for a fix to the next update.

Radar and Satellite issues

schilpat — Wed, 07 Oct 2026 09:09:28 GMT

@Riad-Ishak Hi, thank you for the report. Could you tell us more details? for how long do you observe this issue what device do you use (brand, model, os version) in case you use mobile device, does it happen in the mobile app (and if so, does it also happen in the browser)

COCESNA Las Nubes Weather Radar Unavailable

YacineBoussoufa — Tue, 06 Oct 2026 23:20:56 GMT

@Filip_K Yeah you are right, just checked again and it didn't udpate...

The app crashes on startup (Android 11)

MarkNagy — Tue, 06 Oct 2026 13:00:34 GMT

@macarycedric I am glad it works now. Thank you for your cooperation. :)

weird air pressure line

idefix37 — Tue, 06 Oct 2026 07:01:05 GMT

@Gkikas-LGPZ Indeed, a weird hybrid of coordinate grid and isobars :)

Hurricane in Austria

Suty — Tue, 06 Oct 2026 06:54:00 GMT

@FragCool Hello, thank you for the report. We are already investigating this issue on our end and for now it seems that there is a certain issue with data visualization. We receive correct data, but somehow, there are wrong data in 3h step graph and only sometimes under certain condition. We are still looking for the cause.

Webcam fail

WinnieMP — Tue, 06 Oct 2026 06:06:35 GMT

Hi @guille-querol, our developers have looked into the issue and unfortunately confirmed that although both webcams use RTSP streams, they have a non-standard security configuration that prevents us from retrieving their images. Unfortunately, we cannot restore them on Windy unless the webcam owner adjusts the stream configuration. I am sorry we couldn't resolve this on our end. Thank you for your understanding. KR, Marketa

My Premium hourly iOS widget forecast stopped working

Suty — Mon, 05 Oct 2026 19:46:43 GMT

@northviewsp Hello, please try to follow steps of my colleague above.

Drought Monitor

idefix37 — Sun, 04 Oct 2026 13:33:32 GMT

@Bull-Dawg The default model has recently changed. Did you previously use the default model (ECMWF)? Or a different one? As a Premium user, you can switch back to that model. For example on the browser version: [image: 1791124130456-img_4434.jpeg]