Try posts here or there

@korina Thanks, confirms my assumptions ! Email me if you implement it one day :)

@kliclaos Hello, data cannot be downloaded this way.

@jowlo Unfortunately we are unable to correct individual Madis stations either.

@cimvallesa said in API:

@cimvallesa It works now: Estation

Is it normal that in the station panel, in station ID = 0?

Thanks!

Well, everything is perfect. Thank you!

@rezazeylabi Hello, please do not spam community with posts with unclear information value, it is against our rules.

@rezazeylabi Hello, could you please describe your issue?

@bobbiji
Unfortunately there is no way to delete the blue dot which is shown in Radar map even if you turn off the location feature of your device and you set the start up location by one of your favorites
https://community.windy.com/topic/13183/pinging-blue-location-dot-in-radar-how-to-turn-it-off/2?_=1618726642717

Concerning your weather station you can add it on Windy
https://community.windy.com/topic/10804/weather-station/2?_=1618726642709

@meteo_network Hello, what is your station type and software?

@paulpostema said in Alecto WS-5500:

Bresser

Please see this post - https://community.windy.com/topic/8168/report-your-weather-station-data-to-windy/238?_=1617277255711

@filippoastro Hello, what is your station ID?

@kekert
Thank you !

@antonis-loizou Hello, thank you for suggestion, we will consider it.

@schoetersj Hi, you station is already active, sometimes it takes several hours till the station is visible.

@galfert
Anemo works well. Data are updates every 10 minutes with the anemo but also with the weather station. During the 10 minutes data continue to be acquired.

Data from the anemo or the weather station are sent for free via the Sigfox network. Both anemo and weather station have photovoltaic cell so both are totally autonomous.

Be careful, anemo should be placed at 8m to avoid any interference. This recommendation is valid for any anemo, not specifically the anemo from Barani