@kharlosten
So far, it is not possible to chose the map or the image you want when you open Windy. By default, this is the wind map and you cannot changet it. Maybe in the future,...?

@northcave
There are still ships reporting weather data in Windy. This one is an example:

BC6F4033-AF15-4A35-B991-64434437A33F.jpeg

But it is difficult to find them as weather buoys and ships are all labelled « ships » in Windy.

Hello @Alvarnegro, what type of station do you have? You can check Windy Stations pinned section where you can find posts how to send data to Windy with different stations.

Hello @veeru4u we don't store historical data.
You can check the Article section, where you can find info about past cyclones we posted, maybe you will find some info you can use.

@Korina said in "Error loading or rendering station data". I can't understand it.:

@ComacchioWeather Hi, did you check this manual for Cumulus MX? Please make sure you are entering the correct station ID, which is not f0618aec, but 0 or 1, depending on how many stations you have registered. In your case, the ID will be probably 0.

Yuuup, already did that, thanks.
My station ID for CumulusMX obtained from Windy is 0 and it's correct too because I've only one station. I don't know why Windy still doesn't want to show up the data 🤔

@Luzdelnorte46
Hi, there is a Sounding feature on Windy which could be interesting for you. It allows to get a profile of the atmosphere above your location as provided by ECMWF. Click the right button of your mouse to open it.
It shows 2 curves: the red one is the air temperature, the blue one the dew point. When the 2 curves are close together, there is a risk of clouds at this altitude (the water vapor condensates when the air temperature reaches the dew point). The profile changes when you move the timeline cursor.
So it's another way to estimate the risk of cloudiness. But I don't know if it brings really additional information compared to the Cloud layer as it comes from the same model forecast.

Capture d’écran 2020-07-01 à 12.14.52.png

Should be WMO station ID 85471:
titi.jpg

I have registered the station and have a Station ID. I am not seeing where to get a key. The Open API button takes me to text / discussion pages.

@johnckealy Hi John

https://iweathar.co.za/products

This is installed at our local airfield.

I wrote a plugin: windy-plugin-iw.

I see they have a few stations in France now. Powered by solar panels.

Cost appears to be just over 400 Euro. (R7800) Perhaps more now.

Hi,
i have a similar Problem.
I update Windy with GET Parametes via https://stations.windy.com/pws/update/API-KEY
With a HTTP request i get data from my Station but on https://www.windy.com/station/pws-f0676497 i only get the spinning circel.

Edit: Deleting and recreating the Station fixed the Problem
Best Regards
Gregor

Yes, thanks, it's working. Took about 4 days, but all is good

@jenca If you mean frequency, then you should send data in 5min intervals.

@RonaldPippin Hi, please see this post - https://community.windy.com/topic/8263/windy-station-vs-cwop-station?_=1590749820808

@David-Amarillo @Rigomar Hi, it really seems you have some connection problems, please check the stability of your internet.

@Mike-stone-66
Where do you find an x to remove a favorite?
To remove a favorite you need to press the "bin" in your list of favorites.

Capture d’écran 2020-05-24 à 11.48.59.png

If you have set an alert for a spot, edit the alert with "the small pencil" and delete it first.

@ovkproff Hello, if you authorize the station, data should be flowing automatically. Please check the internet connection to your station.