@paulpostema said in Alecto WS-5500: Bresser Please see this post - https://community.windy.com/topic/8168/report-your-weather-station-data-to-windy/238?_=1617277255711

@filippoastro Hello, what is your station ID?

@kekert Thank you !

@antonis-loizou Hello, thank you for suggestion, we will consider it.

@schoetersj Hi, you station is already active, sometimes it takes several hours till the station is visible.

@galfert Anemo works well. Data are updates every 10 minutes with the anemo but also with the weather station. During the 10 minutes data continue to be acquired. Data from the anemo or the weather station are sent for free via the Sigfox network. Both anemo and weather station have photovoltaic cell so both are totally autonomous. Be careful, anemo should be placed at 8m to avoid any interference. This recommendation is valid for any anemo, not specifically the anemo from Barani

When l click on the "see at Windy" icon, the map is displayed and on the bottom is "Error loading or rendering station data"

@korina Hi, I did but again same result. Would be possible to create some dummy station from your side under my account which I could modify?

@techsys Hello, thank you for report, we will have a look at this.

well it shows data again, so it seems to be released from lockdown ;) https://www.windy.com/station/pws-f076f530?47.134,15.218,14

Hello @mgeay, thank you for considering sharing observed weather data with us. If you have a weather station, you can connect it with Windy. You will find more on how to connect it here – https://community.windy.com/topic/8168/report-your-weather-station-data-to-windy. In this forum category, you will also find manuals on different kinds of stations.

@thomasko Are you talking about this weather station ??

I´ve been checking the feature and i´m happy it´s fixed. Nice effort. Thank you guys.

@meteop Hello, API key does not change no matter how many stations you have. Stations are recognised by their station ID, your first station will have ID 0. You need to add this parameter into Weewx as well.

@meteocamporamoso Hi, so @MatteoPV is your second account and you no longer have problem with registering pws, is that correct?

@korina OK thanks. I apologize

@alainq Hi, These "errors" are due to Personal Weather Stations. You can verify by clicking them. They are labelled pws or madis. They are not official weather stations. Windy cannot delete them as they have been added by their owner. So it would be worth having the possibility to select in Settings only "official" weather stations (labelled wmo, airport, ad, ship...)

@outrightcrmstore Hello, most of the questions about Windy Stations are already answered in this category - Windy Stations. If you have your own station, you can register it here - stations.windy.com

@mark014 Even if the Windy API key were smaller you still would not be able to upload to Windy with your Ecowitt console using the "Customized" server upload feature because it uploads using a different protocol than what Windy uses. My suggestion for you is to use the Ecowitt GW1000 or Froggit DP1500 in conjunction with your station if you don't currently have one of these. It will be compatible with your current station as long as you get it with the same frequency as your current station (433, 868, or 915 MHz). Then you can run one of the follow software applications that are capable of getting data from the GW1000 / DP1500 and uploading it to Windy. These compatible applications are: Cumulus MX, Meteobridge, Weather-Display, and WeeWX. A good solution to run these is a Raspberry Pi. If you need more guidance you should head over the wxforum.net and read up on these solutions or ask for help there.