<![CDATA[New station data not displayed. Getting error message: "Error loading or rendering station data"]]>Hello,

Yesterday, I setup my weewx installation to start posting to windy.com with the weewx-windy extension. Everything seems to be working with the following log entry appearing every 5 minutes in my logs on my linux server, zeebytes.org:

Jan 25 09:40:15 zeebytes.org weewx[21447]: restx: Windy: Published record 2020-01-25 09:40:00 EST (1579963200)

However, none of the data has yet appeared on WIndy.com. When I go to my station panel at https://stations.windy.com/stations and click on the station button to "see at Windy.com" then I get this error message: "Error loading or rendering station data". I initially set this up over 21 hours ago. Initially, I did not report this since I expected it to take up to an hour to start posting, however, after 21 hours I have concluded that something must be wrong.

My Windy.com station ID is "1f0664e8a", my station name is "Crabapple" and my weewx installation can be viewed at:

https://crabapple.dickens.com

Can somebody assist me in fixing my Windy.com station?

Thanks,

Gordon Dickens

]]>https://community.windy.com/topic/11045/new-station-data-not-displayed-getting-error-message-error-loading-or-rendering-station-dataRSS for NodeSat, 16 May 2026 18:32:36 GMTSat, 25 Jan 2020 15:05:27 GMT60<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Mon, 22 Nov 2021 07:56:09 GMT]]>@aschauer-michl Hello, I can see that you station does not send any data. This is an issue of the plugin itself and I recommend to contact Weewx directly.

]]>https://community.windy.com/post/92750https://community.windy.com/post/92750Mon, 22 Nov 2021 07:56:09 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Fri, 19 Nov 2021 04:52:42 GMT]]>@korina hello, i deleted the station and did a new setup. station ID is f069bce6 again, copied a new key in the weewx.conf and restarted. weewx is running for more than 12h now.
again:
weewx[25880] ERROR weewx.restx: Windy: Failed to publish record 2021-11-19 05:45:00 CET (1637297100): Failed upload after 3 tries

i´ll keep waiting. greez & thanks

]]>https://community.windy.com/post/92573https://community.windy.com/post/92573Fri, 19 Nov 2021 04:52:42 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 18 Nov 2021 10:26:49 GMT]]>@aschauer-michl Hello, the fact that the key changes is correct, all the generated keys work. Please do the set up again and wait a while, it takes several hours till the station appears.

]]>https://community.windy.com/post/92513https://community.windy.com/post/92513Thu, 18 Nov 2021 10:26:49 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 18 Nov 2021 10:14:09 GMT]]>@korina yes the id was set to 0 automatically me thinks:
7c576cc9-b477-42a7-a336-b707d91a78e5-image.png

but one thing is weird: every time i click on the api key banner

the key changes, i thought that the key is static? this time again, so i copied the key an pasted it in the weewx.conf. did a restart again. but "failed to upload..." persists.

tnx michael

]]>https://community.windy.com/post/92504https://community.windy.com/post/92504Thu, 18 Nov 2021 10:14:09 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 18 Nov 2021 06:59:17 GMT]]>@aschauer-michl Hello, did you set the station ID to 0?

]]>https://community.windy.com/post/92485https://community.windy.com/post/92485Thu, 18 Nov 2021 06:59:17 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 18 Nov 2021 06:57:08 GMT]]>@krakon Hello, it seems your station is already showing some data, it may take a a while till the station shows if you entered a new API key.

]]>https://community.windy.com/post/92484https://community.windy.com/post/92484Thu, 18 Nov 2021 06:57:08 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Wed, 17 Nov 2021 07:33:28 GMT]]>hi there,

same issue here with the weewx plugin.
getting the error "ERROR weewx.restx: Windy: Failed to publish record 2021-11-17 08:25:00 CET (1637133900): Failed upload after 3 tries" since the beginning (1 week?).

changed API key too, error persists.
station ID: ID: f069bce6

pls support, thx.
michael

]]>https://community.windy.com/post/92400https://community.windy.com/post/92400Wed, 17 Nov 2021 07:33:28 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Tue, 16 Nov 2021 18:50:09 GMT]]>Having issues with weewx as well.

My station f073e1c4 upon getting new api KEY (which as a matter of fact resets itself while showing it on windy website) throws
weewxd[SOMEPID]: weewx[SOMEPID] ERROR weewx.restx: Windy: Failed to publish record 2021-11-16 19:40:00 CET (1637088000): Failed upload after 3 tries

I think windy part does not regenerate API key properly - or does it change EVERY TIME you visit stations.windy.com?

It's been quite some time when windy reset the key somehow, can't get it working since then.

My question is simple: any chance to get MORE debug logs? Theoretically I could wrap some debug stuff into windy.py - but maybe there's faster solution.
TIA,

Chris de SO1Z (SR1GEO autonomic station)

]]>https://community.windy.com/post/92367https://community.windy.com/post/92367Tue, 16 Nov 2021 18:50:09 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Sun, 15 Aug 2021 17:36:35 GMT]]>When installing I had the doubt since in the Weewx configuration for Windy there is no parameter for ID. The solution: a new API Key

Regards
CD7CKU

]]>https://community.windy.com/post/84934https://community.windy.com/post/84934Sun, 15 Aug 2021 17:36:35 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Fri, 02 Jul 2021 07:20:16 GMT]]>@roberto2011 said in New station data not displayed. Getting error message: "Error loading or rendering station data":

1f06c5bac

Hello, both of your stations are online already, sometimes it takes a while until it's visible on the map.

]]>https://community.windy.com/post/81624https://community.windy.com/post/81624Fri, 02 Jul 2021 07:20:16 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 01 Jul 2021 15:56:24 GMT]]>Same problem for my station ID: 1f06c5bac.
I have sent "https://stations.windy.com/pws/update/MYAPIKEY?station=1&dateutc=2021-07-01T15%3A38%3A46Z&winddir=210&windspeedmph=22.816788&windgustmph=30.19869&dewpoint=7.3&temp=21.10&pressure=30&humidity=37.89"
and I have recevied this message "SUCCESS (valid measurements count: 7, valid station info count: 0)"
Thanks for replies :-)

]]>https://community.windy.com/post/81579https://community.windy.com/post/81579Thu, 01 Jul 2021 15:56:24 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Fri, 14 May 2021 07:14:49 GMT]]>@ejcapo71 Hi, I would recommend to check these articles - https://community.windy.com/topic/10730/how-do-i-connect-my-ambient-weather-ws-2902-to-windy?_=1620976365421. It seems that you will need Ecowitt software.

]]>https://community.windy.com/post/77370https://community.windy.com/post/77370Fri, 14 May 2021 07:14:49 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 13 May 2021 23:06:52 GMT]]>@korina HI. I still don't see my weather station on Windy. Is there something else I have to do? Thank you for your time.

]]>https://community.windy.com/post/77356https://community.windy.com/post/77356Thu, 13 May 2021 23:06:52 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 06 May 2021 07:19:05 GMT]]>@ejcapo71 Hello, it usually takes a while till the station appears on Windy, I would wait a little longer, it should be processed soon.

]]>https://community.windy.com/post/76705https://community.windy.com/post/76705Thu, 06 May 2021 07:19:05 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Wed, 05 May 2021 17:46:12 GMT]]>I have an Ambient Weather Station WS-2902C and I'm having a difficult time adding it on Windy. I registered it and received an ID (ID: f06435af) but it's still not showing. I get the error message saying "error loading or rendering station data."

Is my weather station able to show on Windy? I'm already on Weather Underground and PWS.

Please help!!!

]]>https://community.windy.com/post/76675https://community.windy.com/post/76675Wed, 05 May 2021 17:46:12 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 22 Apr 2021 12:20:40 GMT]]>Thanks for your reply. Today the Stations showed up.
So the api needed some time bevor working i guess.

]]>https://community.windy.com/post/75663https://community.windy.com/post/75663Thu, 22 Apr 2021 12:20:40 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 22 Apr 2021 09:25:00 GMT]]>@genygo said in New station data not displayed. Getting error message: "Error loading or rendering station data":

f0676497

Hello, are you using any additional software to share data? I can see your station is already up on Windy.

]]>https://community.windy.com/post/75633https://community.windy.com/post/75633Thu, 22 Apr 2021 09:25:00 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Wed, 21 Apr 2021 15:43:39 GMT]]>Hi there!
Have the same problems with my station. ID f0676497
I get a SUCCESS with get and the parameters but i see no changes when i try via api and Error loading or rendering station data when trying via the website

]]>https://community.windy.com/post/75576https://community.windy.com/post/75576Wed, 21 Apr 2021 15:43:39 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 18 Mar 2021 15:43:53 GMT]]>@hystrix Hello, I would wait until tomorrow, since it takes some time till the station is shown on Windy. Let me know if the problem persists.

]]>https://community.windy.com/post/73082https://community.windy.com/post/73082Thu, 18 Mar 2021 15:43:53 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 18 Mar 2021 15:17:45 GMT]]>@korina I have added station data to my GET Parameters, and I now get the message: "SUCCESS (valid measurements count: 9, valid station info count: 7)", which seems more positive, but still station ID f0562ded is saying "Error loading or rendering station data".

]]>https://community.windy.com/post/73077https://community.windy.com/post/73077Thu, 18 Mar 2021 15:17:45 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 18 Mar 2021 10:18:55 GMT]]>@korina I am uploading data using Node-RED running on a Raspberry Pi.
Edit - My GET statement is: https://stations.windy.com./pws/update/API-KEY?dateutc=2021-03-18%2010%3A08%3A55&station=0&tempf=50.36&dewptf=36.68&humidity=62&windspeedmph=1.52&windgustmph=3.80&baromin=30.4985&rainin=0.000&winddir=0&uv=1

where API-KEY is replaced with my key.

This upload method, using NODE-Red, is working successfully with other weather websites.

]]>https://community.windy.com/post/73065https://community.windy.com/post/73065Thu, 18 Mar 2021 10:18:55 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 18 Mar 2021 09:57:59 GMT]]>@hystrix Hello, what software do you use to send data?

]]>https://community.windy.com/post/73064https://community.windy.com/post/73064Thu, 18 Mar 2021 09:57:59 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Thu, 18 Mar 2021 09:46:16 GMT]]>@korina I have the same issue.
New station, ID = f0562ded.
Upload returns: SUCCESS (valid measurements count: 9, valid station info count: 0).
Website shows : "Error loading or rendering station data".
I am uploading using GET parameters and my API-KEY.
Am I doing something wrong?
Many thanks.

]]>https://community.windy.com/post/73062https://community.windy.com/post/73062Thu, 18 Mar 2021 09:46:16 GMT<![CDATA[Reply to New station data not displayed. Getting error message: "Error loading or rendering station data" on Fri, 12 Feb 2021 08:59:40 GMT]]>@mstealth22 Do you have ID 1 set for the second station?

]]>https://community.windy.com/post/70656https://community.windy.com/post/70656Fri, 12 Feb 2021 08:59:40 GMT