New station data not displayed. Getting error message: "Error loading or rendering station data"

Korina

Hi @gldickens3, to be able to send data to Windy.com, you need to instal weewx plugin - https://community.windy.com/topic/8472/weewx-how-to-send-data-to-windy

Please let me know if you have already done that.

gldickens3

Hi Korina,

Yes,I have already installed the weewx-windy extensions from here:

https://github.com/matthewwall/weewx-windy

I installed the extension before I setup the windy configuration and API key. I believe that I have weewx and the weewx-windy extension setup correctly since my logs continue to show that my station data is being sent to Windy.com every five minutes as follows:

Jan 27 09:15:20 zeebytes.org weewx[21447]: restx: Windy: Published record 2020-01-27 09:15:00 EST (1580134500)

I am also successfully posting station data to these four other on-line weather services:

AWEKAS
CWOP
PWSweather
Wunderground

It appears to me that, for some reason, Windy.com is not processing my data properly. Nevertheless, please let me know if you want me to change anything in my weewx configuration and/or my Windy.com setup.

Thanks,

Gordon Dickens

Korina

Hi @gldickens3, just to confirm, you did put the API key into the API field and not ID of your station - 1f0664e8a?

We will investigate it and will get back to you asap.

gldickens3

Yes, I put the API key into the API field and not ID of my station. I assigned the API key to the variable, api_key, in weewx.conf.

FYI,

Gordon

Mauri_FTD

I have the same problem with weewx. I have installed in the 12/2019 and all worked fine. Now I notice the error without any changes in my weewx configurations. My station ID is f06852fd

Solutions?

Thank you
Maurizio

Korina

@Mauri_FTD
Hello, please check the weewx plugin if you have everything set up correctly - https://community.windy.com/topic/8472/weewx-how-to-send-data-to-windy

Mauri_FTD

@Korina Yes all is ok, and all worked well in the past. Nothing has changed.
Now I solved the problem with a new API Key that I discover it changes every time you get a copy of Api Key...
Now works, I hope it does not stop in the future.

is it possible to have a warning via mail when the data communication with the station goes down?

Thank you
Maurizio

Korina

@Mauri_FTD Hi, there is no such option to have alerts, hopefully there won't be any new issues with data flow.

elTrauko

@gldickens3 As Mauri_ftf says https://community.windy.com/topic/11045/new-station-data-not-displayed-getting-error-message-error-loading-or-rendering-station-data/8# the system does not it accepts data from two different stations sharing API Key and different ID, it only processes data from ID 0, I did various tests for my second station and it only worked when I input a new API Key; When installing I had the doubt since in the Weewx configuration for Windy there is no parameter for ID. The solution: a new API Key

Regards
CD7CKU

Korina

@elTrauko Hello, please let me know your station ID and type of station. Thank you.

volkskamera

Good Morning,

i've set up my station successfully to feed windy as well.
The plugin works, in the logs it states that the data upload is working.

The first few uploads i receved the error message regarding "data parsing".
This is gone, but now the data is loading without getting finished, the circle continues running

Korina

@volkskamera Hello, could you please provide me with your station ID? Thank you.

meteoalberobello

Morning, I have the same issue.

The station uses Cumulus MX, id -> f05960cb

log message from Cumulus is -> 2021-02-01 11:45:01.062 Windy Response: OK: SUCCESS (valid measurements count: 9, valid station info count: 0)

Many thanks.

KurtK

@meteoalberobello
I've had this issue now for a couple of weeks. Here is my original post. You may want to post there as well:
https://community.windy.com/topic/8168/report-your-weather-station-data-to-windy/227
kk

Korina

@meteoalberobello Hello, your station is now active, we have fixed issue in our database.

mstealth22

@korina

I seem to have the same issue here. Station ID: 1f07b5c8d.

Returning upload success, but getting error loading or rendering station data.

Thanks for any help.

Korina

@mstealth22 Hello, you already have station f07b5c8d, which is working. Station 1f07b5c8d has zero observations.

mstealth22

@korina

Yes, I have 2 stations, configured the same, the first one setup is working fine. The second reports success but I never see data.

Here is the output of data upload:

021-02-11 00:21:04 | ?tempf=6.3&winddir=37&windspeedmph=2&baromin=30.3&humidity=57&dewptf=-5.8&rainin=0&uv=0 | SUCCESS (valid measurements count: 8, valid station info count: 0)

Korina

@mstealth22 Do you have ID 1 set for the second station?

hystrix

@korina I have the same issue.
New station, ID = f0562ded.
Upload returns: SUCCESS (valid measurements count: 9, valid station info count: 0).
Website shows : "Error loading or rendering station data".
I am uploading using GET parameters and my API-KEY.
Am I doing something wrong?
Many thanks.