New station data not displayed. Getting error message: "Error loading or rendering station data"
-
I have the same problem with weewx. I have installed in the 12/2019 and all worked fine. Now I notice the error without any changes in my weewx configurations. My station ID is f06852fd
Solutions?
Thank you
Maurizio -
@Mauri_FTD
Hello, please check the weewx plugin if you have everything set up correctly - https://community.windy.com/topic/8472/weewx-how-to-send-data-to-windyKorina
-
@Korina Yes all is ok, and all worked well in the past. Nothing has changed.
Now I solved the problem with a new API Key that I discover it changes every time you get a copy of Api Key...
Now works, I hope it does not stop in the future.is it possible to have a warning via mail when the data communication with the station goes down?
Thank you
Maurizio -
@Mauri_FTD Hi, there is no such option to have alerts, hopefully there won't be any new issues with data flow.
-
@gldickens3 As Mauri_ftf says https://community.windy.com/topic/11045/new-station-data-not-displayed-getting-error-message-error-loading-or-rendering-station-data/8# the system does not it accepts data from two different stations sharing API Key and different ID, it only processes data from ID 0, I did various tests for my second station and it only worked when I input a new API Key; When installing I had the doubt since in the Weewx configuration for Windy there is no parameter for ID. The solution: a new API Key
Regards
CD7CKU -
@elTrauko Hello, please let me know your station ID and type of station. Thank you.
-
Good Morning,
i've set up my station successfully to feed windy as well.
The plugin works, in the logs it states that the data upload is working.The first few uploads i receved the error message regarding "data parsing".
This is gone, but now the data is loading without getting finished, the circle continues running
-
@volkskamera Hello, could you please provide me with your station ID? Thank you.
-
Morning, I have the same issue.
The station uses Cumulus MX, id -> f05960cb
log message from Cumulus is -> 2021-02-01 11:45:01.062 Windy Response: OK: SUCCESS (valid measurements count: 9, valid station info count: 0)
Many thanks.
-
@meteoalberobello
I've had this issue now for a couple of weeks. Here is my original post. You may want to post there as well:
https://community.windy.com/topic/8168/report-your-weather-station-data-to-windy/227
kk -
@meteoalberobello Hello, your station is now active, we have fixed issue in our database.
-
I seem to have the same issue here. Station ID: 1f07b5c8d.
Returning upload success, but getting error loading or rendering station data.
Thanks for any help.
-
@mstealth22 Hello, you already have station f07b5c8d, which is working. Station 1f07b5c8d has zero observations.
-
Yes, I have 2 stations, configured the same, the first one setup is working fine. The second reports success but I never see data.
Here is the output of data upload:
021-02-11 00:21:04 | ?tempf=6.3&winddir=37&windspeedmph=2&baromin=30.3&humidity=57&dewptf=-5.8&rainin=0&uv=0 | SUCCESS (valid measurements count: 8, valid station info count: 0)
-
@mstealth22 Do you have ID 1 set for the second station?
-
@korina I have the same issue.
New station, ID = f0562ded.
Upload returns: SUCCESS (valid measurements count: 9, valid station info count: 0).
Website shows : "Error loading or rendering station data".
I am uploading using GET parameters and my API-KEY.
Am I doing something wrong?
Many thanks. -
@hystrix Hello, what software do you use to send data?
-
@korina I am uploading data using Node-RED running on a Raspberry Pi.
Edit - My GET statement is: https://stations.windy.com./pws/update/API-KEY?dateutc=2021-03-18%2010%3A08%3A55&station=0&tempf=50.36&dewptf=36.68&humidity=62&windspeedmph=1.52&windgustmph=3.80&baromin=30.4985&rainin=0.000&winddir=0&uv=1where API-KEY is replaced with my key.
This upload method, using NODE-Red, is working successfully with other weather websites.
-
@korina I have added station data to my GET Parameters, and I now get the message: "SUCCESS (valid measurements count: 9, valid station info count: 7)", which seems more positive, but still station ID f0562ded is saying "Error loading or rendering station data".
-
@hystrix Hello, I would wait until tomorrow, since it takes some time till the station is shown on Windy. Let me know if the problem persists.
