New station data not displayed. Getting error message: "Error loading or rendering station data"
Hello, please check the weewx plugin if you have everything set up correctly - https://community.windy.com/topic/8472/weewx-how-to-send-data-to-windy
Mauri_FTD last edited by
@Korina Yes all is ok, and all worked well in the past. Nothing has changed.
Now I solved the problem with a new API Key that I discover it changes every time you get a copy of Api Key...
Now works, I hope it does not stop in the future.
is it possible to have a warning via mail when the data communication with the station goes down?
@Mauri_FTD Hi, there is no such option to have alerts, hopefully there won't be any new issues with data flow.
@gldickens3 As Mauri_ftf says https://community.windy.com/topic/11045/new-station-data-not-displayed-getting-error-message-error-loading-or-rendering-station-data/8# the system does not it accepts data from two different stations sharing API Key and different ID, it only processes data from ID 0, I did various tests for my second station and it only worked when I input a new API Key; When installing I had the doubt since in the Weewx configuration for Windy there is no parameter for ID. The solution: a new API Key
@elTrauko Hello, please let me know your station ID and type of station. Thank you.
volkskamera last edited by
i've set up my station successfully to feed windy as well.
The plugin works, in the logs it states that the data upload is working.
The first few uploads i receved the error message regarding "data parsing".
This is gone, but now the data is loading without getting finished, the circle continues running
@volkskamera Hello, could you please provide me with your station ID? Thank you.
Morning, I have the same issue.
The station uses Cumulus MX, id -> f05960cb
log message from Cumulus is -> 2021-02-01 11:45:01.062 Windy Response: OK: SUCCESS (valid measurements count: 9, valid station info count: 0)
KurtK last edited by
I've had this issue now for a couple of weeks. Here is my original post. You may want to post there as well:
@meteoalberobello Hello, your station is now active, we have fixed issue in our database.
I seem to have the same issue here. Station ID: 1f07b5c8d.
Returning upload success, but getting error loading or rendering station data.
Thanks for any help.
@mstealth22 Hello, you already have station f07b5c8d, which is working. Station 1f07b5c8d has zero observations.
Yes, I have 2 stations, configured the same, the first one setup is working fine. The second reports success but I never see data.
Here is the output of data upload:
021-02-11 00:21:04 | ?tempf=6.3&winddir=37&windspeedmph=2&baromin=30.3&humidity=57&dewptf=-5.8&rainin=0&uv=0 | SUCCESS (valid measurements count: 8, valid station info count: 0)
@mstealth22 Do you have ID 1 set for the second station?
@korina I have the same issue.
New station, ID = f0562ded.
Upload returns: SUCCESS (valid measurements count: 9, valid station info count: 0).
Website shows : "Error loading or rendering station data".
I am uploading using GET parameters and my API-KEY.
Am I doing something wrong?
@hystrix Hello, what software do you use to send data?
@korina I am uploading data using Node-RED running on a Raspberry Pi.
Edit - My GET statement is: https://stations.windy.com./pws/update/API-KEY?dateutc=2021-03-18%2010%3A08%3A55&station=0&tempf=50.36&dewptf=36.68&humidity=62&windspeedmph=1.52&windgustmph=3.80&baromin=30.4985&rainin=0.000&winddir=0&uv=1
where API-KEY is replaced with my key.
This upload method, using NODE-Red, is working successfully with other weather websites.
@korina I have added station data to my GET Parameters, and I now get the message: "SUCCESS (valid measurements count: 9, valid station info count: 7)", which seems more positive, but still station ID f0562ded is saying "Error loading or rendering station data".
@hystrix Hello, I would wait until tomorrow, since it takes some time till the station is shown on Windy. Let me know if the problem persists.
genygo | Premium last edited by
Have the same problems with my station. ID f0676497
I get a SUCCESS with get and the parameters but i see no changes when i try via api and Error loading or rendering station data when trying via the website