New station data not displayed. Getting error message: "Error loading or rendering station data"
-
@volkskamera Hello, could you please provide me with your station ID? Thank you.
-
Morning, I have the same issue.
The station uses Cumulus MX, id -> f05960cb
log message from Cumulus is -> 2021-02-01 11:45:01.062 Windy Response: OK: SUCCESS (valid measurements count: 9, valid station info count: 0)
Many thanks.
-
@meteoalberobello
I've had this issue now for a couple of weeks. Here is my original post. You may want to post there as well:
https://community.windy.com/topic/8168/report-your-weather-station-data-to-windy/227
kk -
@meteoalberobello Hello, your station is now active, we have fixed issue in our database.
-
I seem to have the same issue here. Station ID: 1f07b5c8d.
Returning upload success, but getting error loading or rendering station data.
Thanks for any help.
-
@mstealth22 Hello, you already have station f07b5c8d, which is working. Station 1f07b5c8d has zero observations.
-
Yes, I have 2 stations, configured the same, the first one setup is working fine. The second reports success but I never see data.
Here is the output of data upload:
021-02-11 00:21:04 | ?tempf=6.3&winddir=37&windspeedmph=2&baromin=30.3&humidity=57&dewptf=-5.8&rainin=0&uv=0 | SUCCESS (valid measurements count: 8, valid station info count: 0)
-
@mstealth22 Do you have ID 1 set for the second station?
-
@korina I have the same issue.
New station, ID = f0562ded.
Upload returns: SUCCESS (valid measurements count: 9, valid station info count: 0).
Website shows : "Error loading or rendering station data".
I am uploading using GET parameters and my API-KEY.
Am I doing something wrong?
Many thanks. -
@hystrix Hello, what software do you use to send data?
-
@korina I am uploading data using Node-RED running on a Raspberry Pi.
Edit - My GET statement is: https://stations.windy.com./pws/update/API-KEY?dateutc=2021-03-18%2010%3A08%3A55&station=0&tempf=50.36&dewptf=36.68&humidity=62&windspeedmph=1.52&windgustmph=3.80&baromin=30.4985&rainin=0.000&winddir=0&uv=1where API-KEY is replaced with my key.
This upload method, using NODE-Red, is working successfully with other weather websites.
-
@korina I have added station data to my GET Parameters, and I now get the message: "SUCCESS (valid measurements count: 9, valid station info count: 7)", which seems more positive, but still station ID f0562ded is saying "Error loading or rendering station data".
-
@hystrix Hello, I would wait until tomorrow, since it takes some time till the station is shown on Windy. Let me know if the problem persists.
-
Hi there!
Have the same problems with my station. ID f0676497
I get a SUCCESS with get and the parameters but i see no changes when i try via api and Error loading or rendering station data when trying via the website -
@genygo said in New station data not displayed. Getting error message: "Error loading or rendering station data":
f0676497
Hello, are you using any additional software to share data? I can see your station is already up on Windy.
-
Thanks for your reply. Today the Stations showed up.
So the api needed some time bevor working i guess. -
I have an Ambient Weather Station WS-2902C and I'm having a difficult time adding it on Windy. I registered it and received an ID (ID: f06435af) but it's still not showing. I get the error message saying "error loading or rendering station data."
Is my weather station able to show on Windy? I'm already on Weather Underground and PWS.
Please help!!!
-
@ejcapo71 Hello, it usually takes a while till the station appears on Windy, I would wait a little longer, it should be processed soon.
-
@korina HI. I still don't see my weather station on Windy. Is there something else I have to do? Thank you for your time.
-
@ejcapo71 Hi, I would recommend to check these articles - https://community.windy.com/topic/10730/how-do-i-connect-my-ambient-weather-ws-2902-to-windy?_=1620976365421. It seems that you will need Ecowitt software.
