New station data not displayed. Getting error message: "Error loading or rendering station data"

Korina

@mstealth22 Hello, you already have station f07b5c8d, which is working. Station 1f07b5c8d has zero observations.

mstealth22

Yes, I have 2 stations, configured the same, the first one setup is working fine. The second reports success but I never see data.

Here is the output of data upload:

021-02-11 00:21:04 | ?tempf=6.3&winddir=37&windspeedmph=2&baromin=30.3&humidity=57&dewptf=-5.8&rainin=0&uv=0 | SUCCESS (valid measurements count: 8, valid station info count: 0)

Korina

@mstealth22 Do you have ID 1 set for the second station?

hystrix

@korina I have the same issue.
New station, ID = f0562ded.
Upload returns: SUCCESS (valid measurements count: 9, valid station info count: 0).
Website shows : "Error loading or rendering station data".
I am uploading using GET parameters and my API-KEY.
Am I doing something wrong?
Many thanks.

Korina

@hystrix Hello, what software do you use to send data?

hystrix

@korina I am uploading data using Node-RED running on a Raspberry Pi.
Edit - My GET statement is: https://stations.windy.com./pws/update/API-KEY?dateutc=2021-03-18%2010%3A08%3A55&station=0&tempf=50.36&dewptf=36.68&humidity=62&windspeedmph=1.52&windgustmph=3.80&baromin=30.4985&rainin=0.000&winddir=0&uv=1

where API-KEY is replaced with my key.

This upload method, using NODE-Red, is working successfully with other weather websites.

hystrix

@korina I have added station data to my GET Parameters, and I now get the message: "SUCCESS (valid measurements count: 9, valid station info count: 7)", which seems more positive, but still station ID f0562ded is saying "Error loading or rendering station data".

Korina

@hystrix Hello, I would wait until tomorrow, since it takes some time till the station is shown on Windy. Let me know if the problem persists.

genygo

Hi there!
Have the same problems with my station. ID f0676497
I get a SUCCESS with get and the parameters but i see no changes when i try via api and Error loading or rendering station data when trying via the website

Korina

@genygo said in New station data not displayed. Getting error message: "Error loading or rendering station data":

f0676497

Hello, are you using any additional software to share data? I can see your station is already up on Windy.

genygo

Thanks for your reply. Today the Stations showed up.
So the api needed some time bevor working i guess.

ejcapo71

I have an Ambient Weather Station WS-2902C and I'm having a difficult time adding it on Windy. I registered it and received an ID (ID: f06435af) but it's still not showing. I get the error message saying "error loading or rendering station data."

Is my weather station able to show on Windy? I'm already on Weather Underground and PWS.

Please help!!!

Korina

@ejcapo71 Hello, it usually takes a while till the station appears on Windy, I would wait a little longer, it should be processed soon.

ejcapo71

@korina HI. I still don't see my weather station on Windy. Is there something else I have to do? Thank you for your time.

Korina

@ejcapo71 Hi, I would recommend to check these articles - https://community.windy.com/topic/10730/how-do-i-connect-my-ambient-weather-ws-2902-to-windy?_=1620976365421. It seems that you will need Ecowitt software.

Roberto2011

Same problem for my station ID: 1f06c5bac.
I have sent "https://stations.windy.com/pws/update/MYAPIKEY?station=1&dateutc=2021-07-01T15%3A38%3A46Z&winddir=210&windspeedmph=22.816788&windgustmph=30.19869&dewpoint=7.3&temp=21.10&pressure=30&humidity=37.89"
and I have recevied this message "SUCCESS (valid measurements count: 7, valid station info count: 0)"
Thanks for replies :-)

Korina

@roberto2011 said in New station data not displayed. Getting error message: "Error loading or rendering station data":

1f06c5bac

Hello, both of your stations are online already, sometimes it takes a while until it's visible on the map.

spiceagent11

When installing I had the doubt since in the Weewx configuration for Windy there is no parameter for ID. The solution: a new API Key

Regards
CD7CKU

krakon

Having issues with weewx as well.

My station f073e1c4 upon getting new api KEY (which as a matter of fact resets itself while showing it on windy website) throws
weewxd[SOMEPID]: weewx[SOMEPID] ERROR weewx.restx: Windy: Failed to publish record 2021-11-16 19:40:00 CET (1637088000): Failed upload after 3 tries

I think windy part does not regenerate API key properly - or does it change EVERY TIME you visit stations.windy.com?

It's been quite some time when windy reset the key somehow, can't get it working since then.

My question is simple: any chance to get MORE debug logs? Theoretically I could wrap some debug stuff into windy.py - but maybe there's faster solution.
TIA,

Chris de SO1Z (SR1GEO autonomic station)

aschauer.michl

hi there,

same issue here with the weewx plugin.
getting the error "ERROR weewx.restx: Windy: Failed to publish record 2021-11-17 08:25:00 CET (1637133900): Failed upload after 3 tries" since the beginning (1 week?).

changed API key too, error persists.
station ID: ID: f069bce6

pls support, thx.
michael