New station data not displayed. Getting error message: "Error loading or rendering station data"
-
@hystrix Hello, what software do you use to send data?
-
@korina I am uploading data using Node-RED running on a Raspberry Pi.
Edit - My GET statement is: https://stations.windy.com./pws/update/API-KEY?dateutc=2021-03-18%2010%3A08%3A55&station=0&tempf=50.36&dewptf=36.68&humidity=62&windspeedmph=1.52&windgustmph=3.80&baromin=30.4985&rainin=0.000&winddir=0&uv=1where API-KEY is replaced with my key.
This upload method, using NODE-Red, is working successfully with other weather websites.
-
@korina I have added station data to my GET Parameters, and I now get the message: "SUCCESS (valid measurements count: 9, valid station info count: 7)", which seems more positive, but still station ID f0562ded is saying "Error loading or rendering station data".
-
@hystrix Hello, I would wait until tomorrow, since it takes some time till the station is shown on Windy. Let me know if the problem persists.
-
Hi there!
Have the same problems with my station. ID f0676497
I get a SUCCESS with get and the parameters but i see no changes when i try via api and Error loading or rendering station data when trying via the website -
@genygo said in New station data not displayed. Getting error message: "Error loading or rendering station data":
f0676497
Hello, are you using any additional software to share data? I can see your station is already up on Windy.
-
Thanks for your reply. Today the Stations showed up.
So the api needed some time bevor working i guess. -
I have an Ambient Weather Station WS-2902C and I'm having a difficult time adding it on Windy. I registered it and received an ID (ID: f06435af) but it's still not showing. I get the error message saying "error loading or rendering station data."
Is my weather station able to show on Windy? I'm already on Weather Underground and PWS.
Please help!!!
-
@ejcapo71 Hello, it usually takes a while till the station appears on Windy, I would wait a little longer, it should be processed soon.
-
@korina HI. I still don't see my weather station on Windy. Is there something else I have to do? Thank you for your time.
-
@ejcapo71 Hi, I would recommend to check these articles - https://community.windy.com/topic/10730/how-do-i-connect-my-ambient-weather-ws-2902-to-windy?_=1620976365421. It seems that you will need Ecowitt software.
-
Same problem for my station ID: 1f06c5bac.
I have sent "https://stations.windy.com/pws/update/MYAPIKEY?station=1&dateutc=2021-07-01T15%3A38%3A46Z&winddir=210&windspeedmph=22.816788&windgustmph=30.19869&dewpoint=7.3&temp=21.10&pressure=30&humidity=37.89"
and I have recevied this message "SUCCESS (valid measurements count: 7, valid station info count: 0)"
Thanks for replies :-) -
@roberto2011 said in New station data not displayed. Getting error message: "Error loading or rendering station data":
1f06c5bac
Hello, both of your stations are online already, sometimes it takes a while until it's visible on the map.
-
When installing I had the doubt since in the Weewx configuration for Windy there is no parameter for ID. The solution: a new API Key
Regards
CD7CKU -
Having issues with weewx as well.
My station f073e1c4 upon getting new api KEY (which as a matter of fact resets itself while showing it on windy website) throws
weewxd[SOMEPID]: weewx[SOMEPID] ERROR weewx.restx: Windy: Failed to publish record 2021-11-16 19:40:00 CET (1637088000): Failed upload after 3 triesI think windy part does not regenerate API key properly - or does it change EVERY TIME you visit stations.windy.com?
It's been quite some time when windy reset the key somehow, can't get it working since then.
My question is simple: any chance to get MORE debug logs? Theoretically I could wrap some debug stuff into windy.py - but maybe there's faster solution.
TIA,Chris de SO1Z (SR1GEO autonomic station)
-
hi there,
same issue here with the weewx plugin.
getting the error "ERROR weewx.restx: Windy: Failed to publish record 2021-11-17 08:25:00 CET (1637133900): Failed upload after 3 tries" since the beginning (1 week?).changed API key too, error persists.
station ID: ID: f069bce6pls support, thx.
michael -
@krakon Hello, it seems your station is already showing some data, it may take a a while till the station shows if you entered a new API key.
-
@aschauer-michl Hello, did you set the station ID to 0?
-
@korina yes the id was set to 0 automatically me thinks:
but one thing is weird: every time i click on the api key banner
the key changes, i thought that the key is static? this time again, so i copied the key an pasted it in the weewx.conf. did a restart again. but "failed to upload..." persists.
tnx michael
-
@aschauer-michl Hello, the fact that the key changes is correct, all the generated keys work. Please do the set up again and wait a while, it takes several hours till the station appears.
