New station not showing on Windy
-
Just like to report, I'm having the same issue as OP.
Station is only visible for 6 to 12hrs in a day, then disappears. I've been successfully uploading for a few months, but just this last week I have noticed considerably that the station disappears off the map. https://jiofilocalhtml.run https://forpc.onl -
@xpaceone Hello, what is your station ID please?
-
Same issue for me. It's been about 4 hours. Id is f05da379.
In an attempt to confirm the station functioning, I did execute the following get:
https://stations.windy.com/pws/station/API-KEY/f05da379
I see data with this query, but there are a few strange issues...
For record 1602716100000, I submitted a temperature of 30.27777777777778, however from the get I see the temperature for that record as 303.427778625488. For dewpoint, I submitted 11.725096119522975, but the get record shows 284.875095748901. Wind, winddir, gust, rh, and pressure all seem to be correct in the record. UV, while reported, is not included in data from the get.
-
@dennypage Hello, what software do you use for sending the data? We can recommend WifiLogger, manual can be found here.
-
@Korina I am using WeeWX. I've looked at the json being submitted, and it appears correct:
JSON: {'observations': [{'station': 0, 'dateutc': '2020-10-14 22:55:00', 'temp': 30.27777777777778, 'wind': 0.89408, 'winddir': 225.0, 'gust': 2.2352, 'rh': 32.0, 'dewpoint': 11.725096119522975, 'pressure': 101148.02791569078, 'precip': 0.0, 'uv': 1.4}]}
The station still does not appear on Windy after 20 hours.
-
I hand created a record to submit a temperature value of 0.0. When I query the resulting record, I get a temperature value of 273.15. This is 0.0 degrees Celsius represented in degrees Kelvin. A value of 1.0 gives 274.15 as one would expect. Looks like is is a known issue that submission works in Celsius and query works in Kelvin.
-
@dennypage Hello, I just checked your station and it already appears on Windy - https://www.windy.com/station/pws-f05da379?33.059,-117.175,8,i:pressure
-
Same here... I connected my Netatmo station yesterday and it does not show (f05d7ff7).
How long does it take before it shows on windy? -
@dbasco Hello, if you authorised the station, then the data should be flowing automatically into Windy. Did you check your internet connection?
Korina
-
This post is deleted! -
-
This post is deleted!
