Accumulated rainfall legend
Thanks. Here are my settings. I just estimated the colours. The upper reds were a failed attempt to make the legend more helpful.
More than the fixed colour scale at bottom right corner of the screen, the fact that colours are smoothed/blended in Windy does not allow to see clearly the different colour ranges. You can overcome this problem and get a discrete (not smoothed) scale with only a small blending between each colour range:
If you want to get the code in order to use directly this colour scale, just let me know. That's easier instead of adding lines.
To make a comparison with this colour scale and your own scale, you may use the new one with a different browser without logging in.
Personally I would use the 400 - 500mm red for 500 -1000mm and vice versa.
@idefix37 Would it be still possible to grab your colour code for the rain accumulation?
@idefix37 Yes please, I was hoping you would still have these color codes.
I’ve lost the file so I had to redo it.
I have set the colour precisely to the original colour scale, but I have modified the upper end above 400mm which is to low for 10 days accumulation in tropical areas.
Here is the code:
You must modify the color settings on the website. That’s not possible from the phone app. But the same modification will be applied to all your devices.
Go to Settings
Scroll down and choose Customize color scale
At bottom of page find the line Import/export
Click on [view code] to open a window pop up
Delete the text code in this window
Select and copy all lines of code here above and paste them in the window
Press [Import Gradient]
You can come back to the default Windy settings at any time by pressing Load defaults
It gives this scale and map:
Hope you’ll use it.
@idefix37 Thank you, really appreciate your help :)
I've just change the 0mm & 0.5mm RGB codes back to the default grey.
The new colour codes really help the different mm amounts pop.
Yes, the white used by this colour scale does not enable to get details of the base map. But you could use a lighter grey such as 130,130,130 to avoid too much contrast. And the problem will be the same with the bright yellow to see the locations in base map.
Another glitch is the 2 red colours which are difficult to distinguish.
If you like the overall scale, from this base you can make some small additional adjustments mainly because this colour scale has probably been designed for black printed map and labels.
I come back on the upper end of the colour scale. I was not satisfied with the red colours and with 10 days accumulation in tropical area where it is necessary to have a semi logarithmic scale.
So I propose these steps:
With the following code from 300mm:
Today, as example, using this setting, on 10 days accumulation, in the East of Cairns ACCESS gives this map:
For the light grey, I used 170,170,170
@idefix37 Great, I've just updated my code to match.
Thank you again for all this help :)
Fine but you have one line missing between 200 and 300:
And try for 0 and 0.5 a lighter grey
With the final colour scale here