Height selector is unusable when meteogram and expert mode is shown
-
@Ondřej-Šutera Thanks, appreciate.
-
@ondrejspilka723
Meteogram shows wind at ground surface.
Why do you set the Altitude slider at 3000m in your screenshot ?EDIT: I see you posted several topic about the same question.
Please don’t multiply them ! -
@idefix37 yes I added the same comment when I realized it is worth of report. Sorry for any confusion.
Why is meteogram showing wind at 1000hPa? It just doesn't make sense since main location entry point is map with surface. Location shows altitude. User wants to see wind at location thus at altitude.
I could understand wind respects height slider, but that's not the case either.
-
@idefix37 and why I setup slider? To see real wind in 2700 AMSL.
What do you mean by ground surface? AMSL or altitude of location?
-
@ondrejspilka723
Meteogram does not show the wind at 1000 hPa level, but at the location elevation that is the altitude amsl. -
@Ondřej-Šutera Wind at 10K ft has become unusable, and the slider is too sensitive.
-
@JD-Nichols Hello, to use the slider, you need to close the detailed forecast.
Korina
-
@JD-Nichols Thank You!
-
@Korina Closed detail forecast did not change slider sensitivity. 10K ft used to be available on the slider - no longer and it has become too sensitive to be useful. Please change it back to what it was a few weeks ago.
-
@JD-Nichols Can you please send the screenshot of the issue? If you have small height bar, you can change your list of layers in the expert mode as well.
-
@Ondřej-Šutera
Slider very small and sensitive....surface and FL450...
-
@JD-Nichols What device do you use? Can you specify the model?
-
@Ondřej-Šutera HP laptop.
-
@JD-Nichols Can you please specify the resolution of the device? This can be related to lower resolution of the screen. I see this with the same setup as you have:
-
@Ondřej-Šutera This used to work very well(no change in computer resolution) - it changed about a month ago and has made it VERY difficult to use. I use 10K winds for flying a light plane around the cascade mountains...and the winds at this level are critical to predict turbulence and flying conditions. This option is no longer available - sfc, 2500, 6400, FL180, FL450 are helpful but frequently not enough. Thanks.
-
@JD-Nichols Could be possible that you have our app zoomed in the browser? Can you please test this in another browser or in anonymous window?
-
@Ondřej-Šutera Thank you for your help. The slider becomes usable when I go to a full screen. Not ideal, or what it used to do, but usable. Thanks again.
