Height selector is unusable when meteogram and expert mode is shown
-
@ondrejspilka723
Meteogram does not show the wind at 1000 hPa level, but at the location elevation that is the altitude amsl. -
@Ondřej-Šutera Wind at 10K ft has become unusable, and the slider is too sensitive.
-
@JD-Nichols Hello, to use the slider, you need to close the detailed forecast.
Korina
-
@JD-Nichols Thank You!
-
@Korina Closed detail forecast did not change slider sensitivity. 10K ft used to be available on the slider - no longer and it has become too sensitive to be useful. Please change it back to what it was a few weeks ago.
-
@JD-Nichols Can you please send the screenshot of the issue? If you have small height bar, you can change your list of layers in the expert mode as well.
-
@Ondřej-Šutera
Slider very small and sensitive....surface and FL450...
-
@JD-Nichols What device do you use? Can you specify the model?
-
@Ondřej-Šutera HP laptop.
-
@JD-Nichols Can you please specify the resolution of the device? This can be related to lower resolution of the screen. I see this with the same setup as you have:
-
@Ondřej-Šutera This used to work very well(no change in computer resolution) - it changed about a month ago and has made it VERY difficult to use. I use 10K winds for flying a light plane around the cascade mountains...and the winds at this level are critical to predict turbulence and flying conditions. This option is no longer available - sfc, 2500, 6400, FL180, FL450 are helpful but frequently not enough. Thanks.
-
@JD-Nichols Could be possible that you have our app zoomed in the browser? Can you please test this in another browser or in anonymous window?
-
@Ondřej-Šutera Thank you for your help. The slider becomes usable when I go to a full screen. Not ideal, or what it used to do, but usable. Thanks again.
