<![CDATA[New features]]>It is possible to have the 500 hPa geopotential height on all layers as well as we have for pressure lines? Thank you very much

]]>https://community.windy.com/topic/26386/new-featuresRSS for NodeWed, 15 Jul 2026 03:59:29 GMTMon, 26 Jun 2023 15:25:00 GMT60<![CDATA[Reply to New features on Mon, 03 Jul 2023 08:41:10 GMT]]>Can anyone from the Windy team tell us if the feature will be released? At least the 500 hPa click button, if the altitude slider with alla layers requires more effort in terms of software development

]]>https://community.windy.com/post/149551https://community.windy.com/post/149551Mon, 03 Jul 2023 08:41:10 GMT<![CDATA[Reply to New features on Sat, 01 Jul 2023 21:27:26 GMT]]>@agbruno Save some of your admiration untill what you want to be implemented is done.

]]>https://community.windy.com/post/149456https://community.windy.com/post/149456Sat, 01 Jul 2023 21:27:26 GMT<![CDATA[Reply to New features on Fri, 30 Jun 2023 19:07:27 GMT]]>I've been begging for this feature for years. It's currently impossible to overlay 500mb heights on the satellite map. My suggestions is to allow the current altitude-slider to plot selected isolines for either the Geopotential height or pressure options as an overlay on any selected weather basemap (wind/temp/satellite/RH).

Also, Windy needs to add an option in settings to thicken the isolines to allow for better viewing.

]]>https://community.windy.com/post/149376https://community.windy.com/post/149376Fri, 30 Jun 2023 19:07:27 GMT<![CDATA[Reply to New features on Fri, 30 Jun 2023 03:46:17 GMT]]>@agbruno I understand you are talking about the standard Sounding tool.

]]>https://community.windy.com/post/149265https://community.windy.com/post/149265Fri, 30 Jun 2023 03:46:17 GMT<![CDATA[Reply to New features on Thu, 29 Jun 2023 10:13:46 GMT]]>@idefix37
I would like to add that I think Windy is the best weather app out there. In Italy we say: grazie di esistere. I also want to thank @idefix37 for considering and understanding my request.

]]>https://community.windy.com/post/149174https://community.windy.com/post/149174Thu, 29 Jun 2023 10:13:46 GMT<![CDATA[Reply to New features on Wed, 28 Jun 2023 18:57:37 GMT]]>@ginoar
This has not been changed.
Please do not duplicate the same posts in different threads.
You have already received a reply.

]]>https://community.windy.com/post/149077https://community.windy.com/post/149077Wed, 28 Jun 2023 18:57:37 GMT<![CDATA[Reply to New features on Wed, 28 Jun 2023 17:02:01 GMT]]>you change a lot. Dont like new features. THE velocit and direction arrows is not the same. Is annoying. I pay premiun suscription

]]>https://community.windy.com/post/149074https://community.windy.com/post/149074Wed, 28 Jun 2023 17:02:01 GMT<![CDATA[Reply to New features on Wed, 28 Jun 2023 16:35:29 GMT]]>@idefix37
The ability to use the altitude slider with all layers in order to set Geopot. heights would be the best. I hope to see this ability or at least the click button soon

]]>https://community.windy.com/post/149068https://community.windy.com/post/149068Wed, 28 Jun 2023 16:35:29 GMT<![CDATA[Reply to New features on Wed, 28 Jun 2023 17:00:25 GMT]]>@agbruno
And if someone wants to have the geopotential heights at 250/300 hPa level along the jet stream, the slider is useful.

As already requested, I would be so glad to get the geopotential heights as a color shaded layer, not only as isolines. It is the best way to analyse the 500hPa-surface heights. It would enable to set isobars (amsl) or temperature isolines (at 500 hPa).

]]>https://community.windy.com/post/149037https://community.windy.com/post/149037Wed, 28 Jun 2023 17:00:25 GMT<![CDATA[Reply to New features on Wed, 28 Jun 2023 13:20:09 GMT]]>@idefix37 said in New features:

GP heights

it would be enough to add a specific 500 hPa click button

dd1eb8a1-47f9-40f2-82c9-22b7f922fc4e-image.png

]]>https://community.windy.com/post/149020https://community.windy.com/post/149020Wed, 28 Jun 2023 13:20:09 GMT<![CDATA[Reply to New features on Wed, 28 Jun 2023 07:57:18 GMT]]>@agbruno
In fact what is needed is the ability to use the altitude slider with all layers in order to set Geopot. heights a 500hPa. But if using the Pressure layer + GP heights, users should understand that Pressure is amsl and the GP heights at the level set by the Altitude slider.

]]>https://community.windy.com/post/148960https://community.windy.com/post/148960Wed, 28 Jun 2023 07:57:18 GMT<![CDATA[Reply to New features on Wed, 28 Jun 2023 07:46:04 GMT]]>@idefix37

Geopotential isolines at 500 hPa are very useful for medium-long term forecasts.

I will continue to ask for this feature to be released: to plot geopotential isolines at 500 hPa in combination with all the different layers - like pressure acts now.

]]>https://community.windy.com/post/148956https://community.windy.com/post/148956Wed, 28 Jun 2023 07:46:04 GMT<![CDATA[Reply to New features on Wed, 28 Jun 2023 07:11:54 GMT]]>@Ahmed-A-AS
Yes, but with Rain or Radar layers, the isolines of Geopotential heights are shown at surface ! What information does it provide? Nothing.
Users typically want geopotential isolines at 500 hPa or at other level, but not at surface or near the surface.
In Windy these geopotential heights are displayed in meters, not in decameters (dam). So 540 means 54 dam, not 540 dam.

]]>https://community.windy.com/post/148948https://community.windy.com/post/148948Wed, 28 Jun 2023 07:11:54 GMT<![CDATA[Reply to New features on Tue, 27 Jun 2023 16:36:51 GMT]]>@Wheats said in New features:

it would be a great feature if one could plot various isolines in combination with all the different layers - like pressure acts now.

Yes. It would be a great feature if one could plot various isolines in combination with all the different layers - like pressure acts now.
I hope it will be done in a next release

]]>https://community.windy.com/post/148827https://community.windy.com/post/148827Tue, 27 Jun 2023 16:36:51 GMT<![CDATA[Reply to New features on Tue, 27 Jun 2023 13:45:24 GMT]]>@Ondřej-Šutera @agbruno Oh I see. My apologies for misinterpreting. I'd agree then, I think it would be a great feature if one could plot various isolines in combination with all the different layers - like pressure acts now.

]]>https://community.windy.com/post/148790https://community.windy.com/post/148790Tue, 27 Jun 2023 13:45:24 GMT<![CDATA[Reply to New features on Tue, 27 Jun 2023 07:16:20 GMT]]>@agbruno Hi, as you said, this is not possible for rain layer, since Geopotential height is available only for certain layers.

]]>https://community.windy.com/post/148741https://community.windy.com/post/148741Tue, 27 Jun 2023 07:16:20 GMT<![CDATA[Reply to New features on Tue, 27 Jun 2023 06:35:59 GMT]]>What I mean is: I have rain layer with pressure and I would like to have rain layer with geopotential height at 500hPa, but it seems that this is impossible..

]]>https://community.windy.com/post/148735https://community.windy.com/post/148735Tue, 27 Jun 2023 06:35:59 GMT<![CDATA[Reply to New features on Tue, 27 Jun 2023 06:17:24 GMT]]>@der_unfassbare_ Unfortunately, there is only one color scheme in radar layer.

]]>https://community.windy.com/post/148729https://community.windy.com/post/148729Tue, 27 Jun 2023 06:17:24 GMT<![CDATA[Reply to New features on Mon, 26 Jun 2023 15:44:48 GMT]]>Ist IT possible to have a weather Radar forecast Like weather.com?
https://www.wetteronline.de/regenradar/schweden?mode=interactive&wrx=56.25,13.18&wrm=7.73&wrt=20230626-1405-2&wro=true

Best regards
Thomas

]]>https://community.windy.com/post/148661https://community.windy.com/post/148661Mon, 26 Jun 2023 15:44:48 GMT<![CDATA[Reply to New features on Mon, 26 Jun 2023 15:35:11 GMT]]>@agbruno You can choose to display different isolines.
Pressure, Geopot. height, Temperature, Freezing altitude. The only one that has a little switch is "pressure" though.
Capture.JPG
Hope that helps!

]]>https://community.windy.com/post/148660https://community.windy.com/post/148660Mon, 26 Jun 2023 15:35:11 GMT