Bresser Weather Station

[ajohnstott]

@theaudiman I would give serious thought to purchasing an alternative to Bresser. I had the 5 in 1 for many years and found all readings very accurate. Living in open countryside the key readings I followed were, wind speed, rainfall and temperature. I was primarily always watching wind speed due to potential property damage. This unit packed up and I bought the Bresser 7 in 1. What a disappointment to the extent I might just scrap it and buy something else. The readings are so inaccurate especially wind speed. I’ve tried altering the sensitivity but no improvement. No rational explanation from Bresser despite offering courteous answers but not solving the problem. I am presently in a “red weather alert “ in Scotland , the wind is howling and I know it must be 30/35 mph if not more. My Bresser is presently showing gusts 6.6 mph. What a joke. I like the online facility and being able to view and follow other stations around the country and the online community but it doesn’t compensate for inaccurate information. Regards

[Gkikas LGPZ]

@ajohnstott
The question remains ... Bresser 5in 1 can be connected to Windy stations ?

[vanFelius]

@Gkikas-LGPZ
I’m curious too if we can hook a Bresser up to Windy.

There may be an option here but I also read that the key value cannot contain the amount of characters as the api key.

Anyone knows what to fill in?

[Suty]

@ajohnstott @Gkikas-LGPZ @vanFelius Hi, I think this thread should help with answering this Bresser question. Unfortunately, we don't have any specific tutorial or insrtuctions.

[Gkikas LGPZ]

@Suty
Finally ... I found a way!
I forwarded my station's data from WU to NOAA's CWOP and to Windy,
by using this script
https://github.com/leoherzog/WundergroundStationForwarder

[Gkikas LGPZ]

@Suty

... glad to see the visualization of solar radiation (in yellow)

but ... I don't see the rain (reported yesterday evening-night)

Is there any adjustment I must do?

[Suty]

@Gkikas-LGPZ I see you have there Pressure, am I right. We limit these visualizations and it is possible to display only two values from these 4 (Rain, pressure, solar radiation and uv).

[Gkikas LGPZ]

@Suty
Then... I preffer "rain" instead of "solar radiation".

[Gkikas LGPZ]

@Suty
For better visualization, I suggest pressure (line) to be drawn as the top layer (in front of rain and/or solar radiation)
and not to be covered by those layers.

[Gkikas LGPZ]

@Suty
... also, I think you can try to use "rain" and "solar radiation" at the same time
as, when rain exists, solar radiation is limited.

e.g.

or ...

[Filip_K]

Hi @Gkikas-LGPZ, I believe both precipitation and solar power are already being displayed. See for example this station in Prague or screenshot below.

I believe there might be issue with correctly processing data from different types of stations. There might be some kind of bug in processing that leads to data not being stored or displayed. We will investigate this a bit more.

[Komousap]

These weather stations are cool gadgets, but sometimes they can be a bit off, especially with things like wind speed in built-up areas. Living in the UK, surrounded by buildings and all, it's tough to get accurate readings, right?

[idefix37]

@Komousap
These weather stations are not gadgets, but they need to be installed in a proper location to get accurate reports. As you say, when there are high buildings in the surrounding, the wind measurement, speed and direction, will be surely wrong. Same with temperature.
Fortunately now in Windy you can choose the weather stations category you want (Aiports, WMO, PWS…).

[Komousap]

@Komousap said in Bresser Weather Station:

These weather stations are cool gadgets, but sometimes they can be a bit off, especially with things like wind speed in built-up areas. Living in the UK, surrounded by buildings and all, it's tough to get accurate readings, right?

I've got one myself, and while it's great for temp and humidity, I take the wind speed with a grain of salt.
I hear ya on the struggle to find a good spot to mount it, too. It's like trying to find a unicorn sometimes! 😅
If you're serious about getting precise wind readings, you might wanna check out Kestrel Instruments on kestrelinstruments.com. They've got some solid gear that's used by the pros. But hey, for everyday use, as long as the temp and humidity are on point, I'm happy enough.

[jphobbs]

@Gkikas-LGPZ

1. What Windy API service do you use for generating the key?
2. What windyStationID do you use in the WundergroundStationForwarder script?

edit: solved this myself. I was using the windy API not the windy weather station API which has a much longer API key.