My PWS station has disappeared in favor of Madis
-
@paulg1977 said in My PWS station has disappeared in favor of Madis:
A few weeks ago I set up Weather Display to feed Windy directly, I also set up to feed CWOP/Madis.
All went well for a while but I see my direct feed has vanished in favor of the Madis feed, how do I get my feed to switch back
The average reporting time of my direct feed was around 10 minutes, the Madis feed showing 67 minutes - I seem to have an historical feed rather than an current feed.It seems like there's a problem we both have. Instead of getting info straight from Windy, we're now getting it from CWOP/Madis, which is making the updates take longer To fix this and get real-time data again, you might need to go back into Weather Display settings and change the feed settings. Make sure you set up the direct feed properly and make it the main one over CWOP/Madis. If you're not sure how to do this, check the Weather Display documentation or ask their support for help.
-
@mncraftmod
My station, feeds windy through MADIS (not directrly to windy station)
and reports every 10 min with avg delay 12 min. -
@Gkikas-LGPZ said in My PWS station has disappeared in favor of Madis:
@mncraftmod
My station, feeds windy through MADIS (not directrly to windy station)
and reports every 10 min with avg delay 12 min.Amazing>
-
@Suty Do you have an update on this?
The MADIS station with a relatively large delay consistently masks our near real time direct feed to windy.
We use Davis Weatherlink at an airport to send the weather to windy and to CWOP/NOAA every 5 minutes . it takes additional time, sometimes 30 minutes or longer, for MADIS data to filter through to windy servers.
Would it make sense for Windy to display the station with a higher frequency and more recent data when two feeds overlap for the same location?
-
@Suty We are also curious about this. Our weather station broadcasts to via meteobridge to Windy and several services on 2 - 120 second intervals. We would like to both be able to view more frequent data, as well as claim the station, as it is part of our Weather + Webcam infrastructure.
-
@adward011 said in My PWS station has disappeared in favor of Madis:
@Gkikas-LGPZ said in My PWS station has disappeared in favor of Madis:
@mncraftmod
My station, feeds windy through MADIS (not directrly to windy station)
and reports every 10 min with avg delay 12 min.Amazing>
The station feeds through MADIS to Windy, with reports coming every 10 minutes, though there’s typically a 12-minute delay. -
I’ve noticed similar issues with my PWS disappearing as well. It was working fine before, but now it seems to be replaced by MADIS data. Is there any way to restore it or link it back to my account?
-
My PWS also disappeared and got replaced by MADIS. It was showing accurate data before, but now I can’t access it. Does anyone know how to fix this or reconnect the station? Any advice would be appreciated.
-
This post is deleted! -
A few weeks back, I configured Weather Display to send data directly to Windy, as well as to CWOP/Madis[.](link urlhttps://capcutproapk.org/) Initially, everything worked smoothly, but I’ve noticed that my direct feed to Windy has disappeared and has been replaced by the Madis feed. Now, instead of getting up-to-date information every 10 minutes, the data appears to be delayed, with the Madis feed showing an average reporting time of 67 minutes. It seems like I’m receiving older data rather than real-time updates. How can I switch back to my original direct feed?