AROME altitude layers : a survey
-
altitude with arôme would be great ! I agree with others, it's the most accurate in the french Alps, but for the rest of the Alps too: I m using it in Austria (sadly only for the west part) and Italy too.
And I say it as a paying member (it's the only application I pay for)It would be easier for beginners to use windy, because nowadays I have to explain them how to get the wind in altitude with choosing the weather on the highest peak around. It's tricky so not accessible to beginners.
Plus I would love to have the possibility to chose arôme by default instead of the ecmwf model which is only good in flatlands.
In fact we should be able to choose the model order by preference (For me it would be 1 arôme, 2 icon D2, 3 ecmwf). So if I am in a place where arôme is not available, it switchs to icon.I would be able to not have the ecmwf model completing the arôme d2 after 2 days on the 7 days view. For the completion after 48h, icon EU would be better than ecmwf. In last case (I don't see why we couldn't have completion with icon EU), even nothing would be better than completion with ecmwf.
-
would be awesome as here in France Arome is the most accurate model!
-
Thanks for your post @Samygallego
I have had the same feedback from many paraglider pilots: AROME would be awesome.
PG pilots have little interest in surface conditions, what they are looking at to check the conditions is the sounding forecast - that's why many users complained about the v42 update when the plugin sounding stop working for a few days before I had time to update the plugin to the new API.
AROME covers the Alps where thousands of people are flying on good day. Here in France meteo-parapente.com is popuplar because it uses the AROME model but the UI is way less friendly than windy.
Please switch to AROME 2.5 🙏.
Windy is the best ❤️
-
Please allow to have AROME altitude layers, would be very helpful for us French paragliding pilots!
-
I'm also interested, arome is THE model for France.
-
This is much needed Windy team, it'll boost your app adoption in the vol libre communities even further, as we currently have to use many different sources to derive a meaningful forecast. I have been premium subscriber for years to support the team. Thank you in advance!
-
Hi, it would be amazing to be able to use Arome 2.5 for altitude layers. I hope it is possible one day!
-
Merci pour votre travail, avoir arôme sur le.best sounding serait un vrai plus pour affiner nos prévisions aerologiques.
Merci encore -
Same thing here. Arome altitude layers would be great !
-
Windy is such a great tool and arome layers is a must. Don't understand why it is not already there!
-
Oh yes. That would be so gooooood! As a matter of fact I rarely use arome unfortunately because of this limitations: altitude and also forecasts for only 24 hours. I would go get it on meteoblue for example wich is too bad since we can have it all on windy.
-
Please please ! replace Arome1.3 by Arome2.5 (with Altitude) ! 2.5km is already a very nice resolution and, as Samy stated, if the 2.5 output comes from the 1.3 forecast, there is no point in keeping the full resolution at surface and depriving Windy aficionados from the highly reliable Arome forecast above surface ! There's definitely a demand from the community ! Many thanks to the Windy developers!
-
Hello,
Yes please it would be incredible to have altitude layers with Arôme 2,5 instead of 1,3 surface. For the time being, we only can predict our trajectory with the altitude layers of ECMWF, which is not ideal at Day-1 or early morning of the D-Day...
Thanks for Windy anyway ! -
Ok I vote for
-
@ukenfly i vote for it too ! Excellent idea
-
@vicb oui, mais les conditions de surface sont aussi à prendre en compte (petit déco en plaine à basse altitude,on vol pas tous à 3000...😅),il nous faut idéalement le vent au sol et le vent en altitude (meteociel,par ex...)
-
@Silversurfer75 je ne pense pas qu'une grille a 2.5km soit gênante en plaine?
Comme le dit @Samygallego les prévisions sont exactement les mêmes. La seule différence est la résolution de la grille.
Il me semble donc que arome2.5 serait mieux pour tout le monde?
Samy (qui est ingénieur prévisionniste chez MF) pourra sûrement nous éclairer un peu plus. -
Vivement les couches d'altitude avec Arome..., c'est extrêmement important pour les parapentistes,merci pour votre aide !😜
-
@Silversurfer75 Surface layer is also available in AROME2.5, see documentation here :
https://donneespubliques.meteofrance.fr/?fond=produit&id_produit=131&id_rubrique=51In particular the details for packages here :
https://donneespubliques.meteofrance.fr/client/document/descriptiontechnique_paquetsarome_donneespubliques_v2_20240402_367.pdf
(En français : les champs de surface sont aussi présents dans AROME2.5, voir la doc ici :
https://donneespubliques.meteofrance.fr/?fond=produit&id_produit=131&id_rubrique=51En particulier le détail des paquets ici :
-
I need to know altitude wind strength and direction too
