Problem with traj plugin.
-
Hello. I'm having problems with the trajectory plugin.
When I open it, the window on the left becomes transparent (this is enough for me to know it won't work), and when I press start to select the trajectories, it doesn't work. I'm missing many models and heights, and I doubt what it tells me is true. The process ends, and the start button returns to start.
I've already experienced this problem in another country, but I realized it was happening when my connection went through a VPN. I removed the VPN and everything worked again. Now in Spain, it's happening again. I've tried from my home (fiber) and from my phone with Wi-Fi on my computer. Neither works.
Any idea what's going on and how to fix it?
Thank you so much for your attention and for all the work of the team behind all this. -
Thx, working on a fix
-
@rittels If you need anything, please tell me.
-
@javierbu
I published a new version, It should be fixed now. Please let me know. It is a very intermittent bug, appears to occur with VPN. -
@rittels
Hello. Thank you very much for your interest.
I'm not sure it's working properly.
At low altitudes, until to 900 meters, it always shows the same direction, although there are differences of between 10 and 20 degrees depending on the altitude.
Interestingly, at altitudes higher than 900 meters, it does show the directions correctly.
I'm sharing screenshots to help you understand what I mean.
-
The altitude is above mean sea level and your elevation is 900 meters, so everything below 900m will be approximately surface.
