Route planner, weather on map doesn't correspond with weather ribbon
-
@Thialf-mate
Sorry, you are right. I don’t know why you get this anomaly.
But as the direction is wrong too, there is a wrong synchronisation between map and panel. -
@Thialf-mate
I have tried to replicate your issue. But I don’t observe the same anomaly.
On my customised map showing a wind speed scale in Beaufort degrees, you see that 29kt N is just between 6 Bft (orange) and 7 Bft (red brick).
This discrepancy between map and panel is usually seen when the speed button is not turn ON.
Could you turn it OFF and ON again. -
I had done that already several times the past couple of days, but to no avail. At this moment however, the ribbon seems to correspond much better somehow.
-
Unfortunately the problem seems to persist. In the past this was not the case. Has there been a change in programming on this feature?
-
@Thialf-mate
Which browser are you using ? And which device and OS ?
As said above, it works for me but on iPad with Safari. -
Windows 10 Enterprise with Edge browser. On Android it also doesn't function properly.
-
@Thialf-mate
Please could you post new screenshots, in both version. -
It is basically the same as my first screenshot.
-
@Thialf-mate
I can't explain it. I hope it gets fixed.
Just one more question: is the map from the ECMWF model? -
Yes, it's the ECMWF model indeed.
Do the programmer also read these posts?
-
@Thialf-mate
Administrators do read every messages and some developers too.Would you plot the same route as my screenshot between these 2 points. And note the ECMWF update time. In my example it is 2025-10-19T18:00:00Z
-
That example plots well over here as well, but is a short track while the differences are not that much.
-
@Thialf-mate said
the differences are not that much.
There should be no difference at all.
If my route proposal is too short, would a route from La Coruña (NW Spain) to Mizzen head (S Ireland), in one leg, long enough to show the discrepancies you mention ?
I just would like to see if we get the same issue and why. So knowing start and end of trip would be useful.
Another solution would that you provide a GPX file of the route. -
What about the link with the route in my first post?
-
@Thialf-mate
Your link open the Route planner but doesn’t shows any route. -
I do not seem to have the privileges to upload, but the code in the gpx-file is blow (as it doesn't display code properly, I changed < for [. If you change that back in Notepad and save it as gpx-file, hopefully it works).
[?xml version="1.0" encoding="utf-8"?>
[gpx creator="Windy.com" version="1.1" xmlns="http://www.topografix.com/GPX/1/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.topografix.com/GPX/1/1 http://www.topografix.com/GPX/1/1/gpx.xsd">
[rte>
[name>Windy.com track-Tue-21-Oct-2025-204001-GMT.gpx[/name>
[rtept lat="40.6598" lon="-66.83530000000002">
[name>1[/name>
[/rtept>[rtept lat="39.4974" lon="-36.48009999999999">
[name>2[/name>
[/rtept>[rtept lat="37.6887" lon="-25.653800000000047">
[name>3[/name>
[/rtept>[rtept lat="37.7118" lon="-25.624599999999987">
[name>4[/name>
[/rtept>[rtept lat="37.6537" lon="-25.52909999999997">
[name>5[/name>
[/rtept>[rtept lat="37.6811" lon="-25.115400000000022">
[name>6[/name>
[/rtept>[rtept lat="49.2445" lon="-5.570100000000025">
[name>7[/name>
[/rtept>[rtept lat="49.8034" lon="-2.9663000000000466">
[name>8[/name>
[/rtept>[rtept lat="50.4617" lon="0.7930999999999813">
[name>9[/name>
[/rtept>[rtept lat="50.5228" lon="1.0317000000000007">
[name>10[/name>
[/rtept>[rtept lat="50.7043" lon="1.3414000000000215">
[name>11[/name>
[/rtept>[rtept lat="50.9316" lon="1.4478000000000293">
[name>12[/name>
[/rtept>[rtept lat="51.0675" lon="1.6585999999999785">
[name>13[/name>
[/rtept>[rtept lat="51.1684" lon="1.744100000000003">
[name>14[/name>
[/rtept>[rtept lat="51.3853" lon="2.049600000000055">
[name>15[/name>
[/rtept>[rtept lat="51.8419" lon="2.6843000000000075">
[name>16[/name>
[/rtept>[rtept lat="51.8941" lon="2.7725000000000364">
[name>17[/name>
[/rtept>[rtept lat="51.9566" lon="2.9347000000000207">
[name>18[/name>
[/rtept>[rtept lat="51.9687" lon="3.134900000000016">
[name>19[/name>
[/rtept>[rtept lat="51.9746" lon="3.2391000000000076">
[name>20[/name>
[/rtept>[rtept lat="51.9799" lon="3.300999999999931">
[name>21[/name>
[/rtept>[rtept lat="52.0037" lon="3.5833000000000084">
[name>22[/name>
[/rtept>[rtept lat="52.0213" lon="3.8016000000000076">
[name>23[/name>
[/rtept>[rtept lat="52.0273" lon="3.8940000000000055">
[name>24[/name>
[/rtept>[rtept lat="52.0087" lon="3.9692999999999756">
[name>25[/name>
[/rtept>[rtept lat="51.9898" lon="4.044300000000021">
[name>26[/name>
[/rtept>[rtept lat="51.9793" lon="4.0797000000000025">
[name>27[/name>
[/rtept>[rtept lat="51.9704" lon="4.107999999999947">
[name>28[/name>
[/rtept>[rtept lat="51.9669" lon="4.120200000000068">
[name>29[/name>
[/rtept>[rtept lat="51.9497" lon="4.159200000000055">
[name>30[/name>
[/rtept>[rtept lat="51.9232" lon="4.210500000000025">
[name>31[/name>
[/rtept>
[/rte>
[/gpx> -
Have you used this option ?
If you can't export a GPX, at least agree to plot a route from a point on the Irish coast to Newfoundland for a simple test.
-
I can export it, but I can not upload it here. The single great circle voyage from your example plots fine here as well. It is the voyage with 30+ waypoints that gives issues. Have you been able to convert above code into a gpx-file?
-
@Thialf-mate
Sorry I am not a developer with high computer skills.
Perhaps someone from the Windy team can help you by analyzing your GPX file. -
@Thialf-mate
Have you tried to display it here ?
