Tide Forecast on Windy
Rsteffeck last edited by
Please look at the forecast for the Columbia River near Vancouver, WA. There are two tide "forecast" stations near each other wild wildly different data. One is noted as "dubious accuracy". If someone would not notice that "dubious accuracy" note in the title, this could get them in trouble.
I'd love to see the sinusoidal sea level curve. This gives a quick impression on the times and amplitude of the tide. Also, in keeping with Windy's visual style :)
akovia last edited by
Was directed here from another post.
I am trying to find a quicker way to get my local/closest tide data without having to zoom way in on my android device. There are a lot of tide stations near me and I have pinch zoom a bunch just to get to the correct data. I feel like I'm doing something wrong. I wish there was a button somewhere when you have the tide layer on that would just pop up the data for the station closest to your location. I'm hoping this is just user error.
WharfRat last edited by
Not sure if it's at all possible, but a tidal graph like this one is very easily read and even much more informative when interactive where you can slide to a specific time or date to see the forecast; Just a thought.
SPRT last edited by
Well done. The next, even more useful step would be to add a tidal stream animation layer. Any chance? I sail on the west coast of Scotland, where the plan is normally ‘to go with the flow’, and having an animated, time variable layer would be a great aid to planning.
GR last edited by
Love your work. Fast and accurate for Brisbane Australia.
colambre last edited by
A very good idea !!!
Somebody for search harmonic tide algorytm in Spain NW coast ?
salvatore13 last edited by
Hi, I love the tides idea. I do kitesurfing at Tasmania where tides are 2.5m high and they change rapidly so it's a critical information for me before I go on the water. However, the text representation of tides isn't very clear and easy to read. I would love if you could do something more like this:
Well done, that was a missing feature. I'm a solo ocean sailor, kitesurfer and snowkiter, dreaming about combining sailing and snowkiting in Norway at some point.
Well, regarding the tides, I agree with @timber2 on most points. Here's my list:
- meters instead of ft
- coefficients would be nice
- especially in the English Channel (east of Dover), the tides can produce some very weird pattern with double high tides in a cycle due to strange interference. See also this paper. These cases make a visualization very important, instead of just raw High and Low values.
- some ressources that come into mind regarding tide levels:
-- dmi.dk - click on "Vandstand" - this shows a nice "sloshing" of the tide wave in the North Sea
-- myocean & earthcube.org for general ocean & earth data
-- German tide forecasts in Northern and Baltic Sea bsh.de - nice to see the difference between astronomical tide and ocean model prediction, including an error estimate.
- last, for all the whitewater enthusiasts, I know the "tide" on the rivers are of utmost importance! This is probably a bigger project, to keep you guys busy, but would be great to see as well. I guess also to see correlation of accumulated rain and flooding.
Well, keep up the good work!
I agree with your remarks and specially with the advantage of a graphic presentation of the tide variation during 1 or 2 days.
Then you think that tidal coefficients should be nice. Sure, but I am surprised that you use them in Norway. Could you give information about these coefficients.
(Same question asked to @timber2 but not received any answer).
vbsails last edited by vbsails
I agree with the good remarks and comments to improve the tidal data in Windy.
For navigation and sailing it is important to know the reference of the
tidal height. Many nautical charts in Europe are referred to L.A.T. (lowest astronomical tide).
On other areas there will be an other reference level.
In addition it is important to get the exact time(zone) for HW and LW. If a harbour is
accessible e.g. HW +-2 hours, the exact time is essential. Ignoring the one hour of daylight
saving time can cause problems. I suggest a text containing
local time and difference to UTC like: "BST = UTC+1"
A good reference for tidal navigation in Europe is the "Reeds Nautical Almanac"
Otacon last edited by
Great to see the icons for the tides. Maybe the date could show?
Quibezzz last edited by
For the Netherlands it works fine, but..... i was calculating with which hight my ship can pass the bridge. During calculating i experianced that the tides are given in “LAT” (which is not shown) while i was calculating on “NAP”.
Maybe showing both is an option. Or when this is not an option because only the Netherlands is calculating by using “NAP” then at least say or show that it is in “LAT”.
AmphibFlyer last edited by
I live on a tidal river and fly a small amphibious seaplane--so tide height is important to me. Your tables for the James River in Virginia, USA, appear to be quite accurate as far as the times are concerned. Tide height here is heavily influenced by wind, however, so the heights predicted by ALL tide tables are notoriously inaccurate. I think the only to improve them would be to factor local surface wind into the equation. I just do it by feel: if the wind has been 10 knots from the northeast for a day, I figure about 10% more than the tables predict. If it's been two days, 20%. And so on. But those are just very rough guesses. I've never actually measured wind water to be sure of anything. Anyway, I really like your tide predictions!
arthurbeer last edited by
Hi, thanks for creating a great weather app and website, so glad I found it.
The tide section is good but took me a few mins to work out how it’s being displayed. Mainly I think the way the date is written could be clearer. Perhaps it’s just a different format that we’re used to here in the U.K.
Keep up the good work.
@ivo This is a great idea . As a sailor I use windy all the time and this is just one more reason to make it my number 1 usfull App
TDennis last edited by
good idea and very useful for me. The tide table needs to show dates - very confusing looking at the times and not being able to quickly establish what day its referring to. Tide tides seem to be about 30 mins different to local data
in New Zealand
Sverre last edited by
Is this something that could be used to grab data for Norway?
rooster123 last edited by
Great job very handy
T4Tim last edited by
How can tide and current be turned off and on as needed? I find it too much clutter when always on.