Report your Weather Station Data to Windy
Iam trying to post my data to windy from Debian PC using WGET and GET Param method...
When i put temp=value param, it is accepted (SUCCESS) and displayed (https://www.windy.com/station/pws-f06c5d57?radar,49.719,13.239,8) by WINDY.
Same result for rh=value. (So my API key, connection, method.... should be all O.K.)
But when i try to send "temp=value&rh=value" by the same way, request is accepted (SUCCESS) but only temp is displayed on web (station page URL above or getting data using json)...
What can be wrong?
Are params all required or in some spec. order e.g.?
@steinham Try using &humidity=value instead of &rh=value.
THX for that tip, but i did it already with same result... :/ Only able to put temp and wind params together. All others (rh/humidity, gust, winddir, dewpoint, mbar and precip) remains "blank" (null if try to get data back using WINDY API)...
I did not check which of them i am able to submit alone - maybe good homework for tonight... :-)
@TomSlavkovsky Hello,thank you for a great weather station.I have tried to contact someone responsible for your system of identifying country’s.I live in Antigua in the Caribbean ,St Johns is our capital.I cannot tell you more than three of my close islands capitol much less know which island is going to be hit by a hurricane.Why do you put the towns name to identify the country and not their NAMES like ANTIGUA!???I,like most people ,don’t like it ,I don’t want to play guessing games when I am worried or concerned about where the hurrican may or will striking..Please change it to the country’s names..The average person are not sophisticated enough to know towns.I hope you take a moment to think about it.Thank You .Alma
I got my station up and running through Weather Display Software (ID: f06afffe). But there are some things I don't understand when viewing this website on my desktop PC.
1.I have to select "nearest weather stations" to bring up a box with all the nearby stations. I found my station and set it as a favorite. Why is there a message on my station banner at the bottom of the weather map that says "There is duplicate station D5731?
2. When setting up the station it is not clear what station ID is supposed to be. I first set mine to "Exeter". But I see all other stations nearby are using the format like the duplicate station D5731 Where are they getting these ID's? I just made up a number since then and now it's called "D2657: Exeter". Is this what everyone else is doing? Just making up ID's? My f06afffe doesn't seem to have this letter followed by 4 number format.
3. If I set my station as my startup page, it always starts up zoomed out showing entire US. If I zoom in I see the last number in the URL changes from 5 to 8. If I save my bookmark with 8 at the end to start up zoomed in, it reverts to 5 zoomed out when I reload the page. If I change the start up location to GPS, it will save my last zoom value 8 but now centers on the flashing ISP dot. And how do I get rid of the flashing dot showing my ISP location (IP address origin)?
Geez...I'm not even sure how I found my way in this thread.
@markdj pues yo tengo una netatmo y la he podido poner sin problema,lo unico que no se ven los datos del pluviómetro,del resto si
This post is deleted!
ivant last edited by
I have a Netatmo account with two stations far apart. How can I include both of them on Windy? So far when I've tried it displays only one of them and there is no way to see both or even to choose which one I want to post data from. Thanks.
With which GET-name can I send the air quality (PM2.5 PM10)?
This post is deleted!
This post is deleted!
MikeP 4 last edited by MikeP 4
I'm not quite clear. Is the implication that one must run a script on a local system which collects your pws data and then posts that data to windy via the URL and key indicated (https://stations.windy.com/pws/update/API-KEY) ?
Or is there a means to point the windystation (Green Lake - South Shore ID: f068b634) to your pws data stream? ....via your pws MAC (84:F3:EB:21:17:03), from your station on weatherunderground (KWIRIPON11) or what?
I am running one of the ubiquitous ambient weather stations.
Appreciate the clarifications.
...anyone? :/ ...I won't be ignored! ;)
ایستگاه هواشناسی گنو خودکار هستند البته موقت است نگاه بندارید آنلاین هستند هر ساعت یکبار بروزسانی میشود
Can someone explain why my weatherstation is only showing up on the map, and showing reported conditions for only 6 to 12hrs in a day?
Meteobridge is stating its successfully uploading the data every 15mins.
This has been an on going issue for the past two weeks.
There is now a code showing in the Meteobridge log.
Error code: "2019-12-19 11:59:42 Error: 2019-12-19 11:59:29 Read error (Connection timed out) in headers. (no more tries)".
Skid_Mark last edited by
@gavsta40 Mine is doing the same as well.
2019-12-18 20:35:47 Error: 2019-12-18 20:35:31 Read error (Connection timed out) in headers. (no more tries)
@galfert Thanks to your comprehensive explanation, which helps me too. My PWS ist a clone of http://www.foshk.com/Wifi_Weatherstation/WS2900.html sold here as „Eurochron EFWS2900“. As I found out, there are many varieties of so called Wifi-PWS, which are primarily designed as stand alone systems. However, as soon as you want to look at some data collections, you will have to establish a wifi connection in order to send these data to at least one of the dedicated servers you mentioned here.
In order to connect these types of Wifi-PWS, the procedure is not so trivial. Fine Offset provides the App „WS View“ in Google play store or Apple App Store, which does the job. It first establishes the Wifi connection from the PWS to your home access point and has a set of predefined upload procedures for ecowitt.net, Wunderground, Weathercloud, WetherobservationWebsite, and finally a costumized procedure, which in itself chooses between two protocol types: Ecowitt or Wunderground.
After I decided to share my data, I thought, that it should be pretty easy to connect to my (for me as a sailor most valuable service) Windy: You have to enter the hostname, a path, which - in my idea - could harbour the Api-Key, a station ID and the station key. In addition a port number is required and the upload interval in seconds. But an error occures, which tells me the following:
Station ID & Key length : 40
Server length : 64
Path length : 64
Port Range : 0-65535
Interval Range : 16-600
So, path length is far too short for bearing the API-Key.
This is a pity!!
It would be nice, if either you adopt your interface to the limits of WS View, or come into contact with the Company in order to integrate another predefined procedure, which is suitable for Windy.
OTOH, as you offered the solution to install WeeWx on a Raspberry Pi, you hit my preferences perfectly!! For me it is much much much easier to handle with a Raspberry Pi than dealing with so many incompatible weather data exchange protocols, similar to the early stage of Compuserve Email (which I still know pretty well) you mentioned. Your point to WeeWx however, gives me the idea, that I could collect my data without the need of sharing. Thus, I better focus on my collection of RaspPis, fixing some issues for introducing my AIS device into OpenCPN and use Windy only for planning my sailing routes. And I should not „pollute“ these precious Windy data with my PWS.
At least, as long it is much too complicated for greenhorns like me.
I have a Bloomsky-2 and Storm that I can't seem to get up and running on Windy.com. I get A "success" when I enter the following GET https://https://stations.windy.com/pws/update/API-KEY/?winddir=&windspeedmph=&windgustmph=&tempf=&rainin=&baromin=&dewptf=&humidity but nothing shows. If I add values then those values only are displayed. My station ID is f069cbe5.