Report your Weather Station Data to Windy
-
@Korina aparece mi estación en el mapa pero no muestra los datos.
-
@Belatz Then you need to double check if you have API key inserted correctly.
-
I have been trying to get station 2f065b240 up and running with windy for a few days now. I’m running the latest WeeWx with the recommend plugin. The keys seem to be valid along with the data seems to be posing successfully. I have also tried to delete and add new stations with no difference. I did a GET in postman using the api key and station and appears to be getting some sort of data, but the site still has issues loading my station.
-
@BrianH78x said in Report your Weather Station Data to Windy:
2f065b240
Hello, it seems you are finally sending data to us - https://www.windy.com/station/pws-2f065b240?42.031,-71.017,8
-
@Korina Awesome it works. Thanks!
-
@ivo tenemos en nuestra ciudad 36 estaciones meteorológicas transmitiendo a nuestro servidor, seria para nosotros un honor aportar esta info para ser utilizada por esta gran app, los datos pertenecen al Gobierno de la Pcia, a cargo del Ministerio de Agua y Energia, vamos a comenzar a subir los datos siguiento el manual de la API que uds proporcionan,.
-
@Korina tenemos en nuestra ciudad 36 estaciones meteorológicas transmitiendo a nuestro servidor, seria para nosotros un honor aportar esta información para ser utilizada por esta gran aplicación, los datos asociados al Gobierno de la Pcia, una carga del Ministerio de Agua y Energía, vamos a comenzamos a subir los datos seguimos el manual de la API que uds tuvo éxito.
-
@alfredo-g Hello, I think your stations would be a great addition to our portfolio. Please register the stations here and follow the instructions - https://stations.windy.com/
-
@omicron هاا د ککو
-
Hello
I'm trying to add my weather station to Windy:
https://www.windy.com/station/pws-f065378a?45.324,14.279,8
but it is not showing on a map, and no data is displayed on the bottom of browser window.
Api returns SUCCESS when I send the data using for example:
Also in api I can see my data in json format, and it seems to be ok. The problem is that I can not access data using:
https://www.windy.com/station/pws-f065378a?45.324,14.279,8
Could you please help?
Thanks
Regards
Dejan
-
@dmalic said in Report your Weather Station Data to Windy:
Hello
I'm trying to add my weather station to Windy:
https://www.windy.com/station/pws-f065378a?45.324,14.279,8
but it is not showing on a map, and no data is displayed on the bottom of browser window.
Api returns SUCCESS when I send the data using for example:
Also in api I can see my data in json format, and it seems to be ok. The problem is that I can not access data using:
https://www.windy.com/station/pws-f065378a?45.324,14.279,8
Could you please help?
Thanks
Regards
Dejan
Hello,
Same here..
Created the station 1 - 1.5 hours ago..
Posting data with curl.
Actually I have only wind speed now.Posting with curl via linux
https://stations.windy.com/pws/update/api-key??wind=$ms is my format..
sure $ms gives m/s value while posting.
I can see my station on map. but no values seems submitted even I got reply SUCCESS after posting
My station ID f062cde6Regards
-
@gobris
MeanwhileI remember there was some required values on wunderground.. like barometric pressure, temperature, dewpoint etc. and it only accepts the values and shows when u submit all required fields..
I wonder if there is such limitations either on windy.
Adding temperature sensor and posting the temp is easy.. But i dont have any direction sensor for wind yet.. I hope. there are no minimum requirements for data submit.
-
@dmalic Hi, your station is already sending data to Windy.
Please let me know if you have any other questions.
-
@gobris Hello, I can see you are already posting some data (wind) and the station appeared on the map. Are you sending any other data?
-
Tom helped me out and the developers had me put double quotes around the entire URL, e.g., curl "https://......". That fixed it. The "&" separating parameters was causing problems without the quotes so only the first parameter was being seen.
Regards.
Greg
-
so far, every post I sent appears.
Working without any issues..
Sending Gust, wind(ms) and temperature at the moment..
-
Hi all. I have setup a webhook for my Photon and all seems fine from the back-end. howerver i am receiving the following. Just sending temp and humidity to test before adding all sensors.
SUCCESS (valid measurements count: 2, valid station info count: 0)
NOTICE: Measurements not inserted to database because cooldown time 4 minutes (time since previous insertion is 2.16 minutes)!
-
This post is deleted!
-
@jakesie1309 Hello, please send me your station ID. Thank you.
-
Have a PWS on Weatherunderground. Where do I upload my API key to my created station on Windy to upload the data? So lost with the instructions.
