Report your Weather Station Data to Windy

alexjkennedy

Ah thanks. I think it just took a while to appear as it was appearing on the next morning. Thanks for your help.

babice

Hi all,
my station f05f3390 is not on the map. It's diy, sending data by curl POST json:

curl -X POST --connect-timeout 3 -H "Content-Type: application/json" -d '{"observations": [{"station":0, "ts":1599580852, "temp":20.23, "rh":50.5, "mbar":1029.33, "dewpoint":9.62}]}' https://stations.windy.com/pws/update/*api*key*
SUCCESS

At https://stations.windy.com/pws/station/*api*key*/0 I can see data, but

observation	null
observationUpdated	"2020-09-08T06:10:31.975Z"

where time is quite old.
What I'm doing wrong? Please help me. Thanks

Korina

@babice Hello, I can see your station f05f3390 appearing on the map already, it is also sending data.

babice

@Korina Oh, it's OK now. Nothing changed.
Isn't there some timeout (24h) for new stations?
And at https://stations.windy.com/pws/station/apikey/0 I can see new data, but

observationUpdated	"2020-09-09T06:10:54.290Z"

what is not true.

Korina

@babice It takes some time till the station appears on Windy.
I would recommend you to set update interval to 5 minutes.

Antonio Loi

hi i have a weather station mounted in my beach house on an island and i would like to share data with windy.
the problem is that the bresser 5.1 station only sends data to wueatherunderground and weathercloud.
Can you help me understand how I can take the data and send it to windy.
Thank you

Korina

@Antonio-Loi Hello, I would recommend you to try some additional software to send data to us. Some of them are discussed in the stations category.

Antonio Loi

@Korina the weather station automatically connects to 2 sites and does not have the possibility of a wiring connection.
you should use the weaterunderground data with the api key and transfer it to windy.
Another method is let's say impossible unless someone who has the same base as me is able to take the data.

jidanni

I notice that Windy hasn't started using the tons of data offered in
https://opendata.cwb.gov.tw/dataset/observation yet. Just wanted to
let you know.

salman9999

This post is deleted!

SergeyPopov

Hello
The first pressure sent by the station was wrong (98543) but the following are correct. For this reason I have a bad pressure graph on the station page. How can I fix this?

Station page

Korina

@SergeyPopov Hello, this cannot be fixed, you will have to wait until it is overwritten by new data.

fankoo

Hi, I had post my station data to windy and i can see the data by api address..
however I can't not see my station data in windy webstie/app.
can you help me?
station id:f05ba383
Thanks.

Korina

@fankoo Hello, what is your station type?

fankoo

@Korina
Hi Korina, my station is based on ESP8266.

Korina

@fankoo Is there any option to share data?

mreinart

@TomSlavkovsky said in Report your Weather Station Data to Windy:

URL: https://stations.windy.com./pws/update/API-KEY

Is there an extra '.' in URL URL: https://stations.windy.com./pws/update/API-KEY ?

markdj

Is there any way to share my Weatherflow Tempest data with you guys or can you add support? I can create "data authorisations" that makes what I think is an api key (I'm not a programmer) and afaik I can set up wunderground sharing directly though with the way they have treated long time weather station owners is shameful, so a direct way would be good.

Thanks for all you do

Mark

Korina

@markdj Hello, as mentioned in this post, you can use one of these compatible softwares:

Meteobridge (needs host device to install to)
WeeWx + WeatherFlow UDP driver
Weather-Display software

markdj

@korina I do have a weather website running weather station 3 but don't think that supports sending data to Windy. Maybe you can add support like you have for Netatmo stations? It looks like the data is open https://weatherflow.github.io/Tempest/api/