Report your Weather Station Data to Windy
-
@korina I am building my own weather stations and back end. As I wrote earlier, I am using a Java / Spring based back end to send data to Windy using option 2 in the instructions, i.e. HTTP post JSON.
Here is a link to one of the stations:
https://www.meteobrite.com/report?stationId=2
I don't want to use any 3rd party solutions to post data, I want to integrate my own already existing back end solution with Windy. And I can see Windy gets the reported data and reports SUCCESS, it is just the data is not displayed.
I can see many users have had similar problems in the past, and they started to see their data after some time.
So, I am wondering whether I should simply wait more or there is some problem with the data I am sending. If it is the latter, how can I figure out what the problem is? Windy replies with SUCCESS, doesn't report any issues, and I can see the data is actually persisted on your back end site using the second link from my previous post.
Thanks
-
Update: The first weather station showed up on Windy ~ 24 h after the first reports were published. It seems the delay is not 30 minutes, but one day at least. Hopefully, the other weather stations will appear soon.
-
@mtkrastev Glad to hear that, the second one should display as well then.
-
@korina The stations are now visible and reporting as expected.
However, I created two requests to add the webcams from these stations 2 days ago.
-
What is the average time for webcams to be added once a request has been submitted?
-
Is there a separate thread in the forum to discuss webcams and how they are added to Windy?
Thanks
-
-
Update: The webcams showed up automatically after 2-3 days. So, it seems one has to be patient and wait. Things work out in the end :)
-
@mtkrastev Hello, yes, webcams are approved manually, so it take a couple of days till they show up.
-
Hello,
is there any way to upload data from my Froggit WH3000SE PRO (via ecowitt/EasyWeatherV1.5.9)?
Many thanks -
@aidworker Hello, please have a look at this category.
-
Hi - reconnecting my weather station to windy via weewx on a pi after moving house and I get this error in the weewx status report -
"weewx[1984] ERROR weewx.restx: Windy: Failed to publish record 2022-01-18 11:30:00 GMT (1642505400): ...r 3 tries"
I've reinstalled the weewx/windy extension and updated the API key - is there anything else I should do? All help welcome!
-
@pkaras What is your station ID?
-
@korina - it's f076f436, thanks
-
@korina - I've got a more detailed error -
DEBUG weewx.restx: Windy: Failed upload attempt 1:
Not sure what this means! it's from a raspberry pi, via fritz router...
-
@pkaras Hello, did you set the upload intervals to 5 minutes and your station ID to 0?
I would recommend to contact WeeWX directly. -
@korina Thanks korina - It appears to be a security problem - not sure which end the problem is with as a wget command has the same issue so it may not be weewx
-
Hello,
Can the weather data also be uploaded via the ws view app?
-
@lukas1997 Hello, sharing is only available via API.
-
Hi, I have a brand new Davis Vantage Pro 2 with UV and Solar radiation sensors and Davis AirLink Air quality monitor, so I can upload solar, PM1, PM2.5, and PM10 measurements. Also, I have AS3935 powered lightning detector. Your API is not ready for this data?
-
@oldrichsveda Hi, at the moment, you cannot send AQ or lightning data via API.
-
Hi,
I've just registered to upload my station data to Windy and have added the API key to Cumulus MX. A few hours have passed and no sign of it on the site yet. Cumulus is reporting "The SSL connection could not be established, see inner exception" and the station link is showing the Error loading station data message.
Any ideas? In the meantime I am going to regenerate the key now and see how it looks in about 30mins
Station ID is f0437f5b
thanks
Claire -
@dubmuffin said in Report your Weather Station Data to Windy:
f0437f5b
Hello, please have a look at this category - https://community.windy.com/topic/11570/cumulus-mx-how-to-send-data-to-windy
