Report your Weather Station Data to Windy
-
@mtkrastev Hello, yes, webcams are approved manually, so it take a couple of days till they show up.
-
Hello,
is there any way to upload data from my Froggit WH3000SE PRO (via ecowitt/EasyWeatherV1.5.9)?
Many thanks -
@aidworker Hello, please have a look at this category.
-
Hi - reconnecting my weather station to windy via weewx on a pi after moving house and I get this error in the weewx status report -
"weewx[1984] ERROR weewx.restx: Windy: Failed to publish record 2022-01-18 11:30:00 GMT (1642505400): ...r 3 tries"
I've reinstalled the weewx/windy extension and updated the API key - is there anything else I should do? All help welcome!
-
@pkaras What is your station ID?
-
@korina - it's f076f436, thanks
-
@korina - I've got a more detailed error -
DEBUG weewx.restx: Windy: Failed upload attempt 1:
Not sure what this means! it's from a raspberry pi, via fritz router...
-
@pkaras Hello, did you set the upload intervals to 5 minutes and your station ID to 0?
I would recommend to contact WeeWX directly. -
@korina Thanks korina - It appears to be a security problem - not sure which end the problem is with as a wget command has the same issue so it may not be weewx
-
Hello,
Can the weather data also be uploaded via the ws view app?
-
@lukas1997 Hello, sharing is only available via API.
-
Hi, I have a brand new Davis Vantage Pro 2 with UV and Solar radiation sensors and Davis AirLink Air quality monitor, so I can upload solar, PM1, PM2.5, and PM10 measurements. Also, I have AS3935 powered lightning detector. Your API is not ready for this data?
-
@oldrichsveda Hi, at the moment, you cannot send AQ or lightning data via API.
-
Hi,
I've just registered to upload my station data to Windy and have added the API key to Cumulus MX. A few hours have passed and no sign of it on the site yet. Cumulus is reporting "The SSL connection could not be established, see inner exception" and the station link is showing the Error loading station data message.
Any ideas? In the meantime I am going to regenerate the key now and see how it looks in about 30mins
Station ID is f0437f5b
thanks
Claire -
@dubmuffin said in Report your Weather Station Data to Windy:
f0437f5b
Hello, please have a look at this category - https://community.windy.com/topic/11570/cumulus-mx-how-to-send-data-to-windy
-
@korina Yes, i have followed those instructions. The Cumulus Mx log is showing "ERROR - The SSL connection could not be established, see inner exception" every time it tries to send the data. It appears to be an known issue - have you looked into it at all?
-
@dubmuffin Hello, then I would suggest to update your certificate.
-
@korina Hello, I'm finally uploading with some help from the Cumulus forum! I've put a link to the most useful thread here if anyone else has this issue. I'm no expert, but managed to sort out the cert problem.
https://cumulus.hosiene.co.uk/viewtopic.php?p=157268#p157268
Claire
-
UPDATE: Data is now displaying so I guess +- 1 hour - hope this helps others
I just registered a new station f06e461d and am uploading using WeeWX how long does it take before data displays? I am currently just getting "unable to load or render station data"
-
@mitchellkrog said in Report your Weather Station Data to Windy:
f06e461d
Hello, it usually takes several hours till it is displayed on the map.
