Report your Weather Station Data to Windy

dubmuffin

@korina Yes, i have followed those instructions. The Cumulus Mx log is showing "ERROR - The SSL connection could not be established, see inner exception" every time it tries to send the data. It appears to be an known issue - have you looked into it at all?

Korina

@dubmuffin Hello, then I would suggest to update your certificate.

dubmuffin

@korina Hello, I'm finally uploading with some help from the Cumulus forum! I've put a link to the most useful thread here if anyone else has this issue. I'm no expert, but managed to sort out the cert problem.

https://cumulus.hosiene.co.uk/viewtopic.php?p=157268#p157268

Claire

MitchellKrog

UPDATE: Data is now displaying so I guess +- 1 hour - hope this helps others

I just registered a new station f06e461d and am uploading using WeeWX how long does it take before data displays? I am currently just getting "unable to load or render station data"

Korina

@mitchellkrog said in Report your Weather Station Data to Windy:

f06e461d

Hello, it usually takes several hours till it is displayed on the map.

annerobeson

Hello I have a ecowitt weather station and have generated an api but I don’t know how to get my weather station sending data to windy.com can anyone help me please ?

Korina

@annerobeson Hello, I would recommend to try CumulusMX - https://community.windy.com/topic/13080/sending-data-from-ecowitt-weather-station?_=1646638073748

twitch64

Hi I have just got a ambient weather ws2000.
Have got windy id and api ,but what url do I enter into my station etc to get online .
Am sending to ambient and wunderground ok

Korina

@twitch64 Hello, please see this post - https://community.windy.com/topic/12469/ambient-wifi-to-windy/2?_=1639124442569

Renato Elias

Hi there! I'm programming a weather station myself using an ESP8266 controller reading Davis anemometer/vane data. I don't know how to work with Json framework but I can already send data using GET method and would like to know if it's possible to send data using this method for 2 different stations. It seems that we can retrieve data from Windy using .../API-KEY/STATION_ID but I'm not sure if I could use GET method to send data using the same approach. I'll try anyway but maybe someone could help me on this first :)

Renato Elias

@renato-elias nevermind... just found out how to do... we just need to add the station=id as part of the GET string. It's working ;)

Lautarojg

So basically this means that Windy has no easy to use set up to add the API of your weather station to their page? Windguru and Wunderground do, very easily. why doesnt it windy too?

Korina

@lautarojg Hello, adding your station to Windy is easy, all you need to do is to register it at https://stations.windy.com/ and send us your data. In some cases, you will need additional software depending on your station's type.

LZ7AA

Hi guys, I need some help to diagnose an issue I have with POST JSON data of my station. Here is my request:

body: "{"observations":[{"station":0,"temp":23.1}]}"

and i get

body: "ERROR: no params"

Is my JSON format correct? I'm using Node-Red to compile the message and post it.

Vladyslav Lebediev

Good afternoon, colleagues!
I am addressing you with what seems to me a non-standard question.
The situation is as follows - when trying to send data to the site, difficulties arise, what they are connected with, I can’t understand, but I hope for your experience.
I have developed a software and hardware complex for meteorological monitoring based on a microprocessor platform, a sensor unit and a GSM modem for data transmission using GPRS technology.
As a GSM modem, I use the SIM900 module.
The GSM modem is controlled using AT commands.
Sending was tried to be carried out both using the TCP/IP functions, and using the HTTP functions.
That is, by sending a regular GET request in this format:

https://stations.windy.com/pws/update/XXX-API-KEY-XXфX?winddir=n&wind=n"

Where n is the corresponding value of the specified parameter.
According to the latest modem responses, as far as I understand, the error lies in the incorrect reception of the sent request, that is, the server cannot process it - HTTP/1.0 400 Bad Request.
But at the same time in the browser such a request is processed without problems.
I'm sure this system will work because the two sending methods - TCP/IP and HTTP - will do a great job of sending data to Thingspeak.com.
Therefore, I dare to assume that the error may be on the server side, or I am not connecting to it correctly, or for some other reason I cannot get through to the server, or he really does not like my request, or something else.
Usually, when connecting to the server, the command looks like this:

AT+CIPSTART="TCP","api.thingspeak.com","80"

By analogy, I also specify for the site www.windy.com:

AT+CIPSTART="TCP","api.windy.com","80"

But the result is negative, I tried to specify the IP, if I understood correctly:

AT+CIPSTART="TCP","35.201.88.123","80"

But nothing.
I also tried the HTTP method in GET request format:

AT+HTTPPARA="URL","https://stations.windy.com/pws/update/XXX-API-KEY-XXX?winddir=n&wind=n"

But also not effective, I tried many options, there were errors 303, 603 and 400.
Can anyone come across with the organization of such methods of sending? Or understands how to organize it correctly, I will be very grateful.
Below I attach the code of the program, as well as a screenshot of an attempt to send data and responses from the module.

TCP/IP function:
If the URL is "http://api.thingspeak.com/update?api_key=XXX-API-KEY-XXX&field1=n&field2=n&field3=n&field4=n&field5=n&field6=n" and the TCP is "api. thingspeak.com", then everything works.

AT+CPIN?
AT+CSQ
AT+CREG?
AT+CGATT?
AT+CSTT="internet"
AT+CIICR
AT+CIFSR
AT+CIPSTART="TCP","api.windy.com","80"
AT+CIPSEND
https://stations.windy.com/pws/update/XXX-API-KEY-XXX?winddir=n&wind=n

HTTP function:
If the URL is "http://api.thingspeak.com/update?api_key=XXX-API-KEY-XXX&field1=n&field2=n&field3=n&field4=n&field5=n&field6=n" and the IP is "api. thingspeak.com", then everything works.

AT+SAPBR=3,1,"CONTYPE","GPRS"
AT+SAPBR=3,1,"APN","internet"
AT+SAPBR=1,1
AT+SAPBR=2,1
AT+HTTPINIT
AT+HTTPPARA="CID",1
AT+HTTPPARA="URL","https://stations.windy.com/pws/update/XXX-API-KEY-XXX?winddir=n&wind=n" 
AT+HTTPPARA="PROIP","35.201.88.123"
AT+HTTPPARA="PROPORT",80
AT+HTTPACTION=0
AT+HTTPREAD
AT+HTTPTERM

Screenshot of an error when using the TCP/IP function:

Thanks a lot in advance!

Korina

@Vladyslav-Lebediev Hello, what type of weather station do you use? You probably need additional software to be able to send us data.

Vladyslav Lebediev

@Korina Hi! I use a homemade weather station with my software.
I'm trying to send data using the API, but unfortunately your server cannot process my request correctly, or my weather station still cannot connect to your server. It is possible that I am not specifying the correct port when connecting to the server.
May I know your IP, API and possibly port?

mtkrastev

Hi, I have 2 weather stations registered in my account. And they work fine. However, I want to add a 3rd one. When I fill in all the fields and click on Save, the station is not added to the list of stations I have. I am redirected to the page listing my stations, but the newly added station is not there. No specific error or success message is shown.

Is there any limitation on the number of stations a user could add, e.g. 2? Or is there something broken in the add station functionality on Windy? Thanks for your replies!

Korina

@mtkrastev Hello, I just tested adding a new station and everything worked as expected. What browser are you using? Also, did you fill out all the fields?

Korina

@Vladyslav-Lebediev Hello, all the necessary details are stated at stations.windy.com. We cannot provide IP. I suggest trying a third party software.