Report your Weather Station Data to Windy
-
@noahrasheta Hello, you will need additional software. Please check the stations category, there are several programs compatible with Windy.
-
This post is deleted! -
This post is deleted! -
This post is deleted! -
@Ssnjoff I had the same problem. A few days ago my station (GW2067) disappeared. Everything works fine on madis side.
Thanks
-
@Léo-Lachance said in Report your Weather Station Data to Windy:
GW2067
Hello, the station disappears when it stops reporting the latest data. Please double-check that your station reports in 30min intervals minimum.
-
@Korina Hello Korina. Thanks for your answer. I've checked and my station is reporting at 5 min. Interval. Everything looks fine on CWOP too. My station data don't appear on the Windy map but, the data seems to be there and up to date into Windy when I search my station (attached screenshot). Do you know what else it could be?
-
@Léo-Lachance @korina It reappeared today!
-
@Léo-Lachance Yes, please make sure that your station has data no older than 2 hours.
-
Now that you've limited the data access for users, did you take into consideration to give premium access to the members feeding their PWS data to Windy?
I'm thinking about something like flightradar24, flightaware & co are doing. To reward their feeders sharing the ADS-B feed, they upgrade those members to business/enterprise tiers. -
@joemate We have not considered this approach, but thank you for suggestion.
-
The station I keep here is sending data but not showing up in Windy's map. What could be wrong? The station is up and running normally and nothing has changed. I've already checked, using the GET method, and it confirms recent updates but data is not showing up since February 9th. The station is PWS-f079fd3f
-
@Renato-Elias said in Report your Weather Station Data to Windy:
f079fd3f
What software do you use? Did you set the station ID to "0"?
-
@Korina said in Report your Weather Station Data to Windy:
@Renato-Elias said in Report your Weather Station Data to Windy:
f079fd3f
What software do you use? Did you set the station ID to "0"?
Hi Korina, it's a PWS that I program myself using an ESP8266. I was using the GET method (easier for me), where I couldn't find how to specify the station ID, thus, it's not set to "0"
-
Would you consider giving free access to Windy Premium for users who have active reporting weather stations submitting data to Windy?
-
@cagrimmett
Four posts here above, you get the reply to the same question. -
@Renato-Elias I think I've found the answer for my own question on a previous post...
Will make a try including "&stationId=0" on my GET sentence ;)
-
@Korina I'm now sending the stationId but the station is not being rendered in the map yet.
here's how I'm sending the data
and here's the returning message
SUCCESS (valid measurements count: 4, valid station info count: 0)the http return code is 301 (moved permanently) which makes no sense to me...
-
@Renato-Elias it seems windy closed api support on http requests..
-
@Renato-Elias Your station is visible on Windy, but does not show data.