Report your Weather Station Data to Windy

Korina

@idefix37 said in Report your Weather Station Data to Windy:

the values not displayed

Which values?

idefix37

@Korina
Values of Rain:

Here are the values currently displayed, rain is missing.

marcosimonetti

@Korina
gust?
gust direction?

How often can I send data? 1 minute?
thanks

marcosimonetti

@marcosimonetti said in Report your Weather Station Data to Windy:

@Korina
gust?
gust direction?

How often can I send data? 1 minute?
thanks

@Korina
and gust? gust direction?

How often can I send data? min 5 minute?

with Cumulus I can send but... is there an online service that doesn't oblige me to keep the service turned on on my pc?

thanks

Ahmed A.AS

@idefix37 For WMO weather stations, it is possible to see rain accumulation.

idefix37

@Ahmed-A-AS

Very few

marcosimonetti

This post is deleted!

marcosimonetti

Hi @Korina,
I hope you're fine!
could you please write me the specifications of all the parameters that I can send on windi with update request ( https://stations.windy.com/pws/update/MY_PWS_STATION_KEY?winddir=213&wind=8.3&gust=12.6&temp=16.5&....etc etc etc..........&stationId=0)?

wind
gust
to rain
etc. etc
thanks Korina and all

marcosimonetti

@idefix37 said in Report your Weather Station Data to Windy:

@Korina
Values of Rain:

Here are the values currently displayed, rain is missing.

Hi @Korina and all
could you please write me the specifications of all the parameters that I can send on windi with update request ( https://stations.windy.com/pws/update/MY_PWS_STATION_KEY?winddir=213&wind=8.3&gust=12.6&temp=16.5&....etc etc etc..........&stationId=0)?

wind
gust
wind direction
rain (PARTIAL SUCCESS (valid measurements count: 4, valid station info count: 0 - unknown params: 'rain')
etc. etc

I hope to have this information... thanks

idefix37

@marcosimonetti

I'm not really aware of the variables that can be streamed to Windy. Here is a weather station that apparently transmits a maximum of variables. So I guess you can do the same.

Temperature
Dew point
Relative humidity
Rain
Wind direction
Wind speed and gusts

If you have a problem with rain or another parameter, do not use it for Windy. The same goes for the wind, for which many PWS give poor values (because located in town, near buildings, with sensor at wrong height…).

marcosimonetti

Hi @idefix37 ,
if you were very kind, thank you!

this is what i was looking for...

I wonder how to set the operation manual link on a forum with 350 pages though.... I think this thing should be fixed by the developers.

I think this thing should be fixed by the developers.

now I update 8/9 parameters

I hope I explained the problem better... THANK YOU

marcosimonetti

@marcosimonetti said in Report your Weather Station Data to Windy:

Hi @idefix37 ,
if you were very kind, thank you!

this is what i was looking for...

I wonder how to set the operation manual link on a forum with 350 pages though.... I think this thing should be fixed by the developers.

I think this thing should be fixed by the developers.

now I update 8/9 parameters

I hope I explained the problem better... THANK YOU

and Now.... 9/9 !
Yeah

Korina

@marcosimonetti Hello, you can just add the link - https://www.windy.com/articles/add-your-personal-weather-station-on-windy-8182

markdj

Is there any weather station software that can input multiple weather stations and send the data to windy?

Vacoff

Hello, are there any list of compatible weather stations? I am planning to create my own diy weather station and then reporting it to windy. Is it possible? Or there is any kind of standard weather stations?

greyhappy

@marcosimonetti said in Report your Weather Station Data to Windy:

@idefix37 said in Report your Weather Station Data to Windy:

@Korina
Values of Rain:

Here are the values currently displayed, rain is missing.

Hi @Korina and all
could you please write me the specifications of all the parameters that I can send on windi with update request ( https://stations.windy.com/pws/update/MY_PWS_STATION_KEY?winddir=213&wind=8.3&gust=12.6&temp=16.5&....etc etc etc..........&stationId=0)?

wind

gust

wind direction

rain (PARTIAL SUCCESS (valid measurements count: 4, valid station info count: 0 - unknown params: 'rain')

etc. etc

I hope to have this information... thanks

It's relevant information for me, THANK YOU!

Cavadaliga

This post is deleted!

Cavadaliga

Hi, i'm Alessandro.
I want send my weather data on windy site. I'm using an ecowitt weather station and a GW1100 with an external software (cumulus mx) on raspberry pi 4.
Cumulus is started and i watch the dashboard with correct data. I have uploaded on cumulus mx, in third parts uploads, my api-key, id station =0, interval = 5 minutes and catch up is enable. But on windy map i don't see my station and my data, the station it wase create about 15 day's a go.
Many thanks for your help,
Alessandro.

mrpetewx

Is there a limit to how many (time stamped) observations can be uploaded in a single API call?

I'm planning to write a catch-up function similar to what is available for other wx online databases :)

mtkrastev

Hi, is there a limit how many stations can be added via

https://stations.windy.com/stations

with a single account? Currently, I can add only 2 stations. Once the second station is added, the button "+ Station" becomes inactive. Is this a bug or the limit is simply 2 stations?