Report your Weather Station Data to Windy
-
I'm not really aware of the variables that can be streamed to Windy. Here is a weather station that apparently transmits a maximum of variables. So I guess you can do the same.
Temperature
Dew point
Relative humidity
Rain
Wind direction
Wind speed and gustsIf you have a problem with rain or another parameter, do not use it for Windy. The same goes for the wind, for which many PWS give poor values (because located in town, near buildings, with sensor at wrong height…).
-
Hi @idefix37 ,
if you were very kind, thank you!this is what i was looking for...
I wonder how to set the operation manual link on a forum with 350 pages though.... I think this thing should be fixed by the developers.
I think this thing should be fixed by the developers.
now I update 8/9 parameters
I hope I explained the problem better... THANK YOU
-
M marcosimonetti referenced this topic on
-
@marcosimonetti said in Report your Weather Station Data to Windy:
Hi @idefix37 ,
if you were very kind, thank you!this is what i was looking for...
I wonder how to set the operation manual link on a forum with 350 pages though.... I think this thing should be fixed by the developers.
I think this thing should be fixed by the developers.
now I update 8/9 parameters
I hope I explained the problem better... THANK YOU
and Now.... 9/9 !
Yeah -
M marcosimonetti referenced this topic on
-
@marcosimonetti Hello, you can just add the link - https://www.windy.com/articles/add-your-personal-weather-station-on-windy-8182
-
Is there any weather station software that can input multiple weather stations and send the data to windy?
-
K Korina referenced this topic on
-
Hello, are there any list of compatible weather stations? I am planning to create my own diy weather station and then reporting it to windy. Is it possible? Or there is any kind of standard weather stations?
-
@marcosimonetti said in Report your Weather Station Data to Windy:
@idefix37 said in Report your Weather Station Data to Windy:
@Korina
Values of Rain:
Here are the values currently displayed, rain is missing.
Hi @Korina and all
could you please write me the specifications of all the parameters that I can send on windi with update request ( https://stations.windy.com/pws/update/MY_PWS_STATION_KEY?winddir=213&wind=8.3&gust=12.6&temp=16.5&....etc etc etc..........&stationId=0)?-
wind
-
gust
-
wind direction
-
rain (PARTIAL SUCCESS (valid measurements count: 4, valid station info count: 0 - unknown params: 'rain')
-
etc. etc
I hope to have this information... thanks
It's relevant information for me, THANK YOU!
-
-
This post is deleted! -
Hi, i'm Alessandro.
I want send my weather data on windy site. I'm using an ecowitt weather station and a GW1100 with an external software (cumulus mx) on raspberry pi 4.
Cumulus is started and i watch the dashboard with correct data. I have uploaded on cumulus mx, in third parts uploads, my api-key, id station =0, interval = 5 minutes and catch up is enable. But on windy map i don't see my station and my data, the station it wase create about 15 day's a go.
Many thanks for your help,
Alessandro. -
J Jordi JU referenced this topic on
-
J Jordi JU referenced this topic on
-
S Suty referenced this topic on
-
Is there a limit to how many (time stamped) observations can be uploaded in a single API call?
I'm planning to write a catch-up function similar to what is available for other wx online databases :)
-
Hi, is there a limit how many stations can be added via
https://stations.windy.com/stations
with a single account? Currently, I can add only 2 stations. Once the second station is added, the button "+ Station" becomes inactive. Is this a bug or the limit is simply 2 stations?
-
@mtkrastev Can you share the screenshot with the situation? Do you see any error in the dev console of the browser?
-
Hi guys and thank you for opening your API for the community!
I'm developing a sandbox electronics assembly system and if you don't mind, I've featured Windy in the example for calling web APIs.
If you have any remarks, please let me know. It's here:
https://iot.cafe/resources/info/examples/webrelayCheers!
-
This post is deleted! -
Hi, after extensive hardware redevelopment on my Arduino based pws, I'm trying to reestablish data postings to Windy. It used to work!
Are you able to see if my station f075fa74 is pushing data.Many thanks
-
@JMcilvenny Please check this station, it should be the mentioned one.
-
@Ondřej-Šutera
Hi Ondrej, yes, that is indeed my station. All the data currently present (at least for the last couple of weeks) has been "GET" sent to Windy via the API development software POSTMAN. This allowed me to prove my string structure. I am confident that what I'm sending (via the Arduino) is correct.After sending a test string, I do receive an 'HTTP/1.0 308 Permanent Redirect' reply, along with a 'Location: https://stations.windy.com:443/pws/update/xxxAPIxxx?winddir=18
AT+CIPSHUT
Yet nothing presents on the Windy site.? -
@JMcilvenny Hi, I am sorry but I am not sure with colleagues what exactly you need from us now. However, you can check your stations and last observations here.
-
@Ondřej-Šutera Many thanks Ondrej.
I'll continue fault-finding on my side. (It must be something I'm doing wrong). -
I want to add the following station data to windy how do i do this?
