Report your Weather Station Data to Windy
-
Hello all.
Again, nothing changed on my side and Windy stopped receiving my data last Monday, April 29th. Does anyone know what changed here?
My PWS is regularly reporting to Wunderground, PWSweather and ThinkSpeak and everything is published.
https://node.windy.com/pws/stats/f052cfed
Others:
https://www.wunderground.com/dashboard/pws/ISOJOS39
https://www.pwsweather.com/station/pws/ISOJOS39Please help.
Jeffo. -
This post is deleted! -
This post is deleted! -
This is what solved it for me. I used a script from a guy in Github:
https://community.windy.com/post/183560
Thanks, @Gkikas-LGPZ
-
I'm getting relatively frequent errors when I try to send data every 5 minutes. I could extend the period to 6 minutes to fix the issue, but I think it's weird that you say that 5 minutes is OK, but then even a slight amount of jitter in the period will cause error messages.
"Measurement sent too soon, update interval is 5 minutes"
Here are some samples of the measured interval in seconds that show the the variations are around 60 milliseconds and we're still getting errors:
300.001
300.037
299.953
300.035
299.992
300.036
299.943As an experiment, I'll add a static delay before sending the data. It will not affect the interval in any way, but it might help if the problem is in fact a clock sync issue. I could of course track the interval and add a variable delay, but our station is on a strict one minute clock, so the Windy data would start to drift relative to that clock since there's no way to claw back the added milliseconds.
-
@jmunkki Hi, how are you measuring those intervals? You should count 5 minutes since you receive response from us. Those issues you are describing are probably caused by network delay. I can maybe lower the interval little bit so we are not so strict about this limit.
-
@David-Ryzec-3 I placed the timer code just before the HTTP request. Looking at the log, there haven't been any errors in the past 7 hours, so maybe it's fixed, but it could just be luck. We get data every minute, but I'm not in control of that and can not let Windy drive the sample rate. I can of course change the code to send to Windy only every 6 minutes instead of 5 and that will eliminate the issue. I'll switch to a 6 minute send period, if the problem returns.
-
@jmunkki I lowered the limit a little so you should see no errors now
-
I have been unable to compile . Any ideas?
-
Hi, what compilation error do you see? If you want, send me your email by DM and we will review it.
-
@TomSlavkovsky said in Report your Weather Station Data to Windy:
Não consigo enviar os dados das minhas estações. Como eu fasso
-
Hello,
Is there any possibility to select the parameters that are displayed?
for example, changing UV radiation for barometric pressure.
All the best,
-
I want to install weather station at our home and share it with Windy for others to use as we live on an airport. Most of the pilots I know use Windy for verifying airfield conditions before landing. What equipment should I install?
Tommy Butler 4SC7 Wexford Landing
-
Hello everyone! This probably has been already answered somewhere, but is it possible to load on Windy a public weather station? They recently set up one around 100m from where I live, and I was wondering if I could do that to improve accuracy for this location, since I could find only how to load on the website a personal one.
-
Has anyone explored implementing their own RF receiver for receiving data transmitted by Davis Vantage Vue station, perhaps with a RTL-SDR or similar?
-
@galfert clear as mud. I have a new ambient 2902 and cannot figure out how to broadcast or share it to Windy WU or PWS
-
X xd1936 referenced this topic on
-
How to add ambient weather pws?
