Meteobridge added support to share data on Windy
To get the latest Meteobridge software update a few things need to be in place.
1- You need to be sure your Meteobridge license is current. It expires every 2 years. You won't get updates if it isn't current.
2- You need to set the Meteobridge version control drop down in the System tab to be get newest on boot.
3- Then you need to reboot the Meteobridge to have it update to the latest version.
Now you will see Windy in the Weather Network tab.
All you need to do is enter in the long Windy API key and click Save at the bottom.
** But don't do this yet. Pressure is not working right. as you can see from my previous post.
UPDATE: Meteobridge Windy upload has been patched and now works great.
thanks very much for your help - everything worked fine. License is current -newest on boot and updated. I have put in my API key and meteobridge shows green light. How long does it takes until it will get my data ??
@Meteoplug you should seem them by now.
andyk1 last edited by
A new update was just released by meteobridge that addressed this issue and should work with both the galfert's HTTP or meteobridges Weather Network method
Weather Network Status success the last 24 hours
2019-05-27 20:14:06 Success: 2019-05-27 20:13:23
2019-05-27 20:08:52 Success: 2019-05-27 20:08:13
2019-05-27 20:03:43 Success: 2019-05-27 20:03:04
2019-05-27 19:58:17 Success: 2019-05-27 19:57:50
2019-05-27 19:53:10 Success: 2019-05-27 19:52:39
2019-05-27 19:47:57 Success: 2019-05-27 19:47:29
2019-05-27 19:42:48 Success: 2019-05-27 19:42:18
2019-05-27 19:37:50 Success: 2019-05-27 19:37:09
2019-05-27 19:32:27 Success: 2019-05-27 19:31:59
2019-05-27 19:27:29 Success: 2019-05-27 19:26:49
2019-05-27 19:22:10 Success: 2019-05-27 19:21:31.......
But when I check the map....Station xxxxx does not report any observations for given time period or we were unable to retrieve them
Anybody can help please
@Eguraldia send me please your station ID, I will check it. Thanks
@TomSlavkovsky I send you a email few hours ago.
I check few times the whole key and copy and paste its ok and still nothing....live data in meteobridge working fine
2019-05-30 17:26:33 Success: 2019-05-30 17:25:48
2019-05-30 17:21:19 Success: 2019-05-30 17:20:30
2019-05-30 17:15:53 Success: 2019-05-30 17:15:20
2019-05-30 17:10:54 Success: 2019-05-30 17:10:10
2019-05-30 17:05:54 Success: 2019-05-30 17:05:00
2019-05-30 17:00:18 Success: 2019-05-30 16:59:46
2019-05-30 16:55:23 Success: 2019-05-30 16:54:36
2019-05-30 16:49:55 Success: 2019-05-30 16:49:26
2019-05-30 16:45:17 Success: 2019-05-30 16:44:26
2019-05-30 16:39:56 Success: 2019-05-30 16:39:14
2019-05-30 16:34:45 Success: 2019-05-30 16:34:04
2019-05-30 16:29:21 Success: 2019-05-30 16:28:50
2019-05-30 16:24:31 Success: 2019-05-30 16:23:40
2019-05-30 16:19:10 Success: 2019-05-30 16:18:30
2019-05-30 16:14:11 Success: 2019-05-30 16:13:22
2019-05-30 16:08:48 Success: 2019-05-30 16:08:22
2019-05-30 16:03:45 Success: 2019-05-30 16:03:13
And still not report of my station......
Eguraldia1 last edited by Eguraldia1
I just create another account and working fine and delete the other
I had the same issue, Meteobridge says "Success", but the data does not show on Windy or only shows scattered (once an hour). As suggested on the Meteobridge Forum, I copy-paste my Windy key again and now everything works fine! So you do not have to drop and recreate your Account.
I also have the same issue, meteobridge says "Success", but the data does not show on Windy. I also I copied-pasted my Windy key again on meteobridge but no data - it just shows my station location.
@pjheyes Hello, wait several hours, it may take some time till the station is displayed on Windy.
@vojta666 Hello, what is your station ID, please?
I added two stations:
Davis: ID: f07b9642
Netatmo: ID: 1f07b9642
@vojta666 I can see the latest data are from today. Let's wait a couple of hours, the station should appear.
@korina well, Davis station I added yesterday and Netatmo station I added this morning.....
By the way, I also sent you data of my weather web cam the day before yesterday and no reaction from you.....only that you will send me an email twine added.....
THE KITE BUBBLE last edited by
Hello, I have followed all steps and my Meteobridge is uploading successfully but when i search for my station (ID: f049120c) , i get the error message; "Error loading or rendering station".