Meteobridge added support to share data on Windy

galfert

@Meteoplug
To get the latest Meteobridge software update a few things need to be in place.
1- You need to be sure your Meteobridge license is current. It expires every 2 years. You won't get updates if it isn't current.
2- You need to set the Meteobridge version control drop down in the System tab to be get newest on boot.
3- Then you need to reboot the Meteobridge to have it update to the latest version.

Now you will see Windy in the Weather Network tab.
All you need to do is enter in the long Windy API key and click Save at the bottom.

** But don't do this yet. Pressure is not working right. as you can see from my previous post.
UPDATE: Meteobridge Windy upload has been patched and now works great.

Meteoplug

@galfert
thanks very much for your help - everything worked fine. License is current -newest on boot and updated. I have put in my API key and meteobridge shows green light. How long does it takes until it will get my data ??

regards,
Edward

TomSlavkovsky

@Meteoplug you should seem them by now.

andyk1

A new update was just released by meteobridge that addressed this issue and should work with both the galfert's HTTP or meteobridges Weather Network method

Andy

Hello,With meteobrigde

Weather Network Status success the last 24 hours

2019-05-27 20:14:06 Success: 2019-05-27 20:13:23
2019-05-27 20:08:52 Success: 2019-05-27 20:08:13
2019-05-27 20:03:43 Success: 2019-05-27 20:03:04
2019-05-27 19:58:17 Success: 2019-05-27 19:57:50
2019-05-27 19:53:10 Success: 2019-05-27 19:52:39
2019-05-27 19:47:57 Success: 2019-05-27 19:47:29
2019-05-27 19:42:48 Success: 2019-05-27 19:42:18
2019-05-27 19:37:50 Success: 2019-05-27 19:37:09
2019-05-27 19:32:27 Success: 2019-05-27 19:31:59
2019-05-27 19:27:29 Success: 2019-05-27 19:26:49
2019-05-27 19:22:10 Success: 2019-05-27 19:21:31.......

But when I check the map....Station xxxxx does not report any observations for given time period or we were unable to retrieve them

Anybody can help please
Thanks

TomSlavkovsky

@Eguraldia send me please your station ID, I will check it. Thanks

@TomSlavkovsky I send you a email few hours ago.
Thanks

I check few times the whole key and copy and paste its ok and still nothing....live data in meteobridge working fine

2019-05-30 17:26:33 Success: 2019-05-30 17:25:48
2019-05-30 17:21:19 Success: 2019-05-30 17:20:30
2019-05-30 17:15:53 Success: 2019-05-30 17:15:20
2019-05-30 17:10:54 Success: 2019-05-30 17:10:10
2019-05-30 17:05:54 Success: 2019-05-30 17:05:00
2019-05-30 17:00:18 Success: 2019-05-30 16:59:46
2019-05-30 16:55:23 Success: 2019-05-30 16:54:36
2019-05-30 16:49:55 Success: 2019-05-30 16:49:26
2019-05-30 16:45:17 Success: 2019-05-30 16:44:26
2019-05-30 16:39:56 Success: 2019-05-30 16:39:14
2019-05-30 16:34:45 Success: 2019-05-30 16:34:04
2019-05-30 16:29:21 Success: 2019-05-30 16:28:50
2019-05-30 16:24:31 Success: 2019-05-30 16:23:40
2019-05-30 16:19:10 Success: 2019-05-30 16:18:30
2019-05-30 16:14:11 Success: 2019-05-30 16:13:22
2019-05-30 16:08:48 Success: 2019-05-30 16:08:22
2019-05-30 16:03:45 Success: 2019-05-30 16:03:13

And still not report of my station......

Eguraldia1

I just create another account and working fine and delete the other

jjmsau

Like @Eguraldia1 ... I have setup my API and added to Meteobridge. Meteobridge is reporting 'success' that the data has reached the Windy server, but when I look at my station - there's no data at all. Have sent a message to @TomSlavkovsky separately, awaiting reply.

jetstreak66

I had the same issue, Meteobridge says "Success", but the data does not show on Windy or only shows scattered (once an hour). As suggested on the Meteobridge Forum, I copy-paste my Windy key again and now everything works fine! So you do not have to drop and recreate your Account.

pjheyes

I also have the same issue, meteobridge says "Success", but the data does not show on Windy. I also I copied-pasted my Windy key again on meteobridge but no data - it just shows my station location.

Windy station.JPG

Korina

@pjheyes Hello, wait several hours, it may take some time till the station is displayed on Windy.

vojta666

@korina Hi there, I have exactly the same issue as @pjheyes
Added my station API to meteobridge with success, everything seems ok, but no data of my weather station available, only station location....and yes, I am waiting several hours already....

Korina

@vojta666 Hello, what is your station ID, please?

vojta666

@Korina

I added two stations:
Davis: ID: f07b9642

Netatmo: ID: 1f07b9642

Korina

@vojta666 I can see the latest data are from today. Let's wait a couple of hours, the station should appear.

vojta666

@korina well, Davis station I added yesterday and Netatmo station I added this morning.....
By the way, I also sent you data of my weather web cam the day before yesterday and no reaction from you.....only that you will send me an email twine added.....

THE KITE BUBBLE

@tomslavkovsky
Hello, I have followed all steps and my Meteobridge is uploading successfully but when i search for my station (ID: f049120c) , i get the error message; "Error loading or rendering station".
please advice.
Thank you,
Mostafa.

Korina

@the-kite-bubble said in Meteobridge added support to share data on Windy:

f049120c

Hello, sometimes it may take several hours till the station appears on Windy. I would give it a day. Let me know if the problem persists.