How to Access the Windy Stations Data

slawek931

@Suty 2024-03-07 (1).png

Suty

@slawek931 Hi, I am sorry about the delay with reply here. I have got info from the product team and pressure cannot be added there, since we have a filter to display only certain values to keep the readable data. Since you are sending rain and uv, pressure is not allowed.

slawek931

@Suty Ok, thank you for your help and information.
Regards.

Ioanzagk

Hello, how can I access my station's data

[https://kalamaria.gr](link url)

Ioanzagk

Hi, how to access my station
My Station-ID is f06ef7f6

Suty

@loanzagk Here is the link to your station: https://www.windy.com/station/pws-f06ef7f6?39.661,22.978,8

Ioanzagk

Hello, how can I access my station's data

https://meteokalamaria.gr

Suty

@Ioanzagk How would you like to access them? In Windy or anywhere else?

FunnyFarm

@TomSlavkovsky said in How to Access the Windy Stations Data:

https://stations.windy.com/pws/stations/API-KEY

Namaku Anthony

@chezburke said in How to Access the Windy Stations Data:

In addition, there is no rainfall data

Rolandoz

@windywolf-0 I know it's an old thread, but I have just experimented with it and it works well. My URL (my secret key not shown fully):

https://stations.windy.com/pws/station/ey.......................................Ms/1

Notice the /1 at the end. That is not my User ID, but Station ID, which is a number 1, 2, 3, etc. I have two stations registered. As the API secret key is unique, there is not need for further id's other than which station you want to output as you can have multiple stations registered.

Output is somehting like this:

{
  "header": {
    "name": "Hillerød Vejr",
    "content": {
      "url": "https://www.weatherlink.com/embeddablePage/show/29253b7531e245f29849d08b8aa11b36/summary",
      "text": "Roland Lyngvig"
    },
    "agl_temp": 2,
    "agl_wind": 10,
    "elev_m": 51,
    "lat": 55.9441848441452,
    "lon": 12.3373728990555,
    "stationType": "Davis Vantage Pro2 Plus",
    "shareOption": "Open",
    "id": "1f071b2f3",
    "stationId": 1,
    "type": "pws",
    "updated": "2024-07-13T09:50:53.349Z",
    "observation": {
      "avgFreqMin": 5.00248138957816,
      "records": 4,
      "avgDelayMin": 2.50124069478908,
      "latestObs": "2024-07-12T05:58:02.000Z"
    },
    "observationUpdated": "2024-07-12T06:01:57.473Z"
  },
  "data": {
    "ts": [1718273281000, 1718273581000, 1718273881000, 1718274181000, 1718274481000, 1718274781000, 1718275081000, 1718275381000, 1718275681000, 1718275981000, 1718276281000, 1718276581000, 1718276881000, 1718277181000, 1718277481000, 1718277781000, 1718278081000,

My reporting happens from a C#/.NET program I have made that runs locally in my house so it can access the WeatherLink device and read out data every 5 minutes. That is a very good and stable solution that runs 99.9%.

Hunter Killer 2

@slawek931 did you happen to get this to work?
I am using ecowitt and would like to upload data to windy but I'm not entirely savvy with this, if you got it to work, would you be able to helpe out with the steps to do it.

Thank you.

Martin 90d7e031-b91d-4458-a44d-addcad9e0b76

Hello,

How exactly does sending a precip value work?

I am sending precipitation for the last hour as written in the parameter. I have programmed a time window where precipitation for the last 60 minutes is stored and the value is sent every 5 minutes. Anyway, I don't think that adding up the precipitation on the windy side works correctly or the interpretation of this parameter is wrong.

I will give an example of what I send.

10:00 - 0mm (past hour)
10:05 - 5mm (past hour) ------+5mm rain between 10:00-10:05
10:10 - 5mm (past hour)
10:15 - 5mm (past hour)
10:20 - 5mm (past hour)
10:25 - 5mm (past hour)
10:30 - 20mm (past hour)------+15mm rain between 10:25-10:30
10:35 - 20mm (past hour)
10:40 - 20mm (past hour)
10:45 - 20mm (past hour)
10:50 - 20mm (past hour)
10:55 - 20mm (past hour)
11:00 - 20mm (past hour)
11:05 - 20mm (past hour)
11:10 - 15mm (past hour) -------minus 5 because an hour has passed since the rains
11:15 - 15mm (past hour)
11:20 - 15mm (past hour)
11:25 - 15mm (past hour)
11:30 - 15mm (past hour)
11:35 - 0mm (past hour) -------minus -15 because an hour has passed since the rains

So I don't know where the error is, but I'm sending the data as it should (according to the interpretation of precipitation for the past hour)