How to Access the Windy Stations Data
-
@TomSlavkovsky you were right, the problem was that I was trying to use the same API key that I am using for the api4 chart.
Anyone else that stumbles upon this issue and is having trouble figuring out which key to use, read the following:
The API key that you receive from this URL, https://api4.windy.com/api-key/, will not work. You need instead to go to https://stations.windy.com/stations and click on "show key" in the banner on the bottom of the page. That is the key you need to access the JSON data from the stations.
-
Hola,porque no me aparecen los datos del pluviometro de mi estación netatmo???
Los demas datos si aparecen,temperaturas,viento,humedad.......pero los datos de lluvia no.
Gracias y seguir con la aplicacion porque esta muy bien.
Un saludo -
@TomSlavkovsky said in How to Access the Windy Stations Data:
https://stations.windy.com/pws/station/open/API_KEY/STATION_ID
None of them work, it says “Invalid token” for each one.
-
Do you ever answer messages?
-
Hello @windywolf-0, you need to add your station ID and API key to the link.
-
Hi Tom,
I've registered my weather station and generated an API Key, but don't know what to do with the key. My weather station reports to Weather Underground and the data is readily available through that portal, but I don't know how to get my data to Windy.
Also, once it's set up, does my station automatically transmit data to Windy?
Best wishes
Gary -
Hello,
is there also an option for only getting the most recent measurement?
Best Regards
Manfred -
@GPittard
Hi, please see the related posts about sharing data to Windy - https://community.windy.com/topic/8168/report-your-weather-station-data-to-windyYou can also tell me your station ID.
-
-
-
@Πέτρος
Hello, your stations are not sharing any data with us. Please check that you have implemented your API key correctly. -
is ok now?
-
Μυτιληνη meteoclub.gr
ID: 1f06ab758Station ID: 1
Latitude: 39.09474581816838°
Longitude: 26.551122665405273°
Elevation: 47 m
what iam doing wrong help me please http://mytilini.meteoclub.gr/
-
This post is deleted! -
@Πέτρος
Hi, still no progress. Did you add the station ID (in your case 1) to the API key? -
Url: https://stations.windy.com/pws/update/ID: 1f06ab758/
Provider: http://mytilini.meteoclub.gr/ what i have done wrong please help me is iti ok ?
-
Μυτιληνη meteoclub.gr
ID: 1f06ab758
Station ID: 1Station Type: froggit
Sharing option: Open
Location
longitude: 26.551122665405273°latitude: 39.09474581816838°
AGL thermometer: 18 m
AGL anemometer: 18 m
Elevation: 47 m
Station provider
Url: https://stations.windy.com/pws/update/ID: 1f06ab758/Provider: http://mytilini.meteoclub.gr/
please show me where i am wrong and if you can fixed it
-
@Πέτρος I will get in touch with you via email.
I will delete the API key from your posts. You should keep it in private.
-
Hi,
I’m from Philippines and we’re interested in putting our weather stations information directly to windy.
I tried to add one of our weather station, I followed the API instructions in updating the station data using this:
https://stations.windy.com/pws/update/API_KEY?winddir=111&windspeedmph=3&windgustmph=6&tempf=30&rainin=0&baromin=30&dewptf=79.8&humidity=81however, when I try to check my station in windy map I can’t see any data and it keeps loading the ECMWF tab.
here's my station: https://www.windy.com/station/pws-f0645c8d?17.001,121.749,8,i:pressure
Can someone help me with this I might missing some steps here. Thank you
-
Update: it's now working i can see my data now. I'm wondering does it take several days for my newly added station to actually display the data being sent to my windy station?
