Windy launches Route Planner
The Route Planner should have the capability to have speeds inserted for various legs/courses. This should inturn show the movement of the Ship/Boat over the legs with the forecast patterns.
Is it possible at your end (coding wise) to add the height of the terrain to the fcst freezing height which should then give the true freezing height abv sea level?
@stitch Sure, there is a picture from my local development IFR branch :-)
For Freezing Altitude, please consider ...
You could consider the possibility of uploading the polars of a boat so to perform weather routing. To include thresholds on wave height, minimum wind speed for motoring, maximum wind and gust speed and the possibility of evaluating several departure times would be also desirable. Congratulations for the great job done until now.
I'm loving it :)
Just had to get my head in the right space wrt ISA+/- . After a quick bit of Googling I can see the benefits of ISA esp with the tropopause highlighted and areas of potential instability/lower level inversions & cold/warm air advection. Neat!
Are the bottom 2 rows "cloud base height" & "cloud top height"?
I can't wait to get my hands on the Beta product......great work!!!!!!
Show also visibility along the route in the table.
@marekd Great tool! My recommendation: Let the user define somewhere in personal settings the boat speed in % of wind speed for e.g. 45°, 90°, and 135° plus maximum speed and have the tool calculating the progress of the boat along the route. Or, even better, build in the polar diagrams for some typical sailing yachts that the user can chose from in a drop down menu. The table should show the weather forecast along the route at the boat's calculated position while the time (and with it the weather forecast) is progressing. Let the user choose, if distance is indicated in kilometers or nautical miles.
Hello please is there a way to set the speed based on Ground Speed instead of wind speed? that would be useful for road planning! thanks!
still missing (but you already know, I see) possibility to change timing definition and vessel speed.
cdenman | Premium last edited by
When you use windy for boat travel you would want the distance traveled in Nautical miles. The only distance option I see is km which is useless to me. Windy use to offer that option why was it dropped?
As explained here above by @Gkikas-LGPZ, how you can change km by NM
🎉 Another update is out! 🎉
- add Aigram and IFR view
- add more wind marks at more altitude levels for VFR view
- add current view to URL for better sharing
- fix the freezing altitude curve
- highlight all clickable units to (hopefully) avoid repeated stupid posts
Thank you all for your feedback, it helped us a lot :-)
Cavajr. last edited by
@Francfo hi Franco! you have a reason for that!!! but, with a new tecnology progress, you can buy a new Iridium Go and have wifi. Regarsd!!!
Thank you very much for providing the IFR view!
It is very useful for pilots (and aviation meteorologists!).
Please consider to add data for FL340 (250 hPa)
as this is a flight level used by most flights.
Data at 250 hPa are available at Windy as this is a standard level.
IMO you must add data at 250 hPa at "sounding" also
for reasons described here
sandybig | Premium last edited by
@Cavajr I could buy a newer bigger boat, get a professional crew and let them worry about it!
You miss the point (really?) - products like Iridium are expensive, saving data on local device is not - simple!
Very good, thanks!!
- visibility: km to sm conversion still not correct.
- overscrolling to the right navigates to the previous page. (In plugins setting overscroll-behavior-x: none, on various elements, does not stop this).
@Francfo Check out qtvlm, open source weather router. You can save grib file scenarios, run alternative routings, and save them all.