Windy launches Route Planner

[diveservices]

@marekd love it love it love it

[earthmanray]

U guys R awesome with cutting edge thinking ....beautifully done once the user gets past the learning curve

[gniemann]

Toll, das Euer Bestreben ist, vielen Interessenten viel Informationen zur Verfügung zu stellen. Danke
Hochachtungt für Euer Bemühen,

[LMCBALLON]

@marekd
I'm a balloonist and have a high emphasis on surface and lower elevation winds (100m, 300m, 500 m, 750m) for flight planning. Other than that as of now => great tool.

[Frelle]

This is a super feature, thank you I'll use it for flight planning both VFR and IFR low level to 20.000 ft. For this I would need to add route, departure time ETD, True Airspeed TAS and altitude.
Important extra information is a 0 degree gradient relative to MSL(!), ising and information about CBs. For routes of a duration of more than one hour, the diagram should show weather relative to time. Alternatively, use time at the midpoint of the route. I would prefer wind arrows north up, but the red/black/green coloring is excellent.
Finally, a nice to have would be mean of groundspeed and arrival time - ETA.

[stitch]

Thankyou @marekd for the updated VFR display.

I greatly appreciate the work you (and the team) are putting into this product - which makes my work a little bit easier :)

[Gkikas LGPZ]

@marekd
On VFR, the gray shades are R.H., OK.
What is the lower limit of the shaded area? 50% ? 90% ?
The shades are every 10% ?

[stitch]

Hi @marekd ,

could you check the "Freezing Level" line/trace in the cross-section display for the correct plotted height?

I have attached a screen shot (below) showing the EC forecast freezing height at Cootamundra (see picker) as 3000ft.
The cross-section freezing height line is up near the 2000m/6000ft level at the same point. The height of the topography is ~420m.

It doesn't look right????

![alt text](

[leerunge]

Hi, First off thanks so much for the hard work on Windy, it's my favorite weather app/site and I'm always recommending it to friends!

Would it be possible to import .kml or even better google maps routes (or something similar) for long distance road trips to get the wx along the route? The point by point works but it would be far easier to just import based off a currently planned route from a .gpx or .kml.

Thanks!

[Lalalaralyn]

Does this mean you can plot out an ideal path based on weather criteria? Because I've been using the app to find the coolest place to camp each night as I make way through the desert, and it's pretty tedious. Can I now say, "this is my destination" and "find the relative coolest point along the route" (taking into consideration the temperature at 10pm, and also at 10am the next day)? That would be rad if I can do that!

[Lalalaralyn]

@marekd How do I use this? I don't see "distance & planning" anywhere in the menus...

[Spirare]

Great job...however I could not find how to set distance in nautical miles (NM) for boats !?!

[siim]

@Spirare

@Gkikas-LGPZ said in Windy launches Route Planner:

[Spirare]

Got it !
Great, I like this new feature a lot...used it to plan our passage across the Tasman Sea from Hobart - Australia to Nelson New Zealand last May.
Regards,

[bobbymcd]

How can we modify Boat's speed/Sailpolars ?

[marekd]

@Gkikas-LGPZ It is not so easy. It depends on values around, on geopotential height, on the decrease in value with height and more... But here is a picture with imprinted values. Hope it is what you need :-)

[Gkikas LGPZ]

@marekd
Thank you.

I thought it is something like this (where the green shades depict R.H >70%)

In Windy's VFR route planner the grey shades seem to stand for R.H. aprox. >90%

[edson.eustachio]

@marekd I saw you guys have changed the behavior of mapping and planning feature to keep the point position visible while we drag it over the map. Now the new feature is perfect for my experience.

Thanks a lot and congratulations again!!

[nicotom]

It's very interesting and relevant but i would prefer the distances in nautical miles for the boat.

[w.schroeder]

Thank you very much for this excellent program and the features enculded. In the new feature for the routes or waypoints you show the weather along.
A servere problem for pilots (IFR) is - to know the tops where you get out of clouds. So if it would be possible to show the clouds (bottom to top layer) along the route it would be phantastic.

Best Regards
Wolfgang