How to use a route planner
-
Hi, just to avoid confusion:
The Windy route planner, that you reach with the context menu, can be edited, you can move the time slider and it will update and the speed.
For the Flight planner plugin: You have to create your route with the picker buttons and edit it with left hand menu, you can set speed and altitude and departure time. You can then read the weather for the points along the route,. Then, you can superimpose the route planner on the route, by clicking the R Planner button, not by clicking the route planner in the context menu. Once the route planner is superimposed, you cannot (or should not) edit the route. First close it again, change the route, and reopen it.
I borrowed the routeplanner for my plugin, because it is really cool. However, the result is still somewhat buggy. If it hangs, perhaps refresh the page and try again.
Perhaps , to avoid confusion, discuss the plugin here: https://community.windy.com/topic/8745/windy-plugin-fp/4
-
@rittels
I have moved our own discussion to this topic. -
@idefix37 sorry, but this is nonsense. Windy does show a forecast for more than 7 days. You can see the wind now, in 24h, in 2 days, etc. - so a route planer would only make sense, if it shows the wind at the specific location (waypoint) at the time when you are there. This is the information you are looking for. All real route planers are doing this.
-
@rittels I'm talking about the table with the overview about the route. It should show the forecasted wind for any waypoint at the time when you pass by the waypoint. Only then you can evaluate a route. It is a normal feature of all route planers.
If I'm at a waypoint in 24h, then I want to see the wind in 24h and not now. The table should provide this overview. Then you could play with the starting point to find the best starting time to have favourable winds on the route.
If I have to scroll through the route every time to see the wind changes, then it is not a useful tool.
-
@viatormarine Make sure speed is selected on, switched to the right.
-
@rittels I did, I added 5kn boat speed. Please have a look at the screenshot. The table does only show the conditions at the time of departure. But the conditions should change according to the boat speed, so I see the conditions when I'm at a specific location.
-
@viatormarine
First you must select North up.
Left to right as shown in your screen shot is used by aviation people and it is a projection of wind direction on an horizontal axis from left to right.
Then this table must show the weather that you will encounter along the route, not at the starting point. -
@idefix37 Unfortunately not, it has no effect on the table, except the wind direction.
-
@viatormarine
I have just made some tests and at the moment it seems that the Route planner has some issue ! -
@idefix37 Hello, what issue did you notice please?
-
@Korina
In this screenshot you see clearly that the wind direction and speed do not match the wind conditions in the map.
At boat position there is a weak northerly wind, when the table shows a southerly wind of 15kt.
-
@idefix37 The routeplanner data represents data that extends from the middle of a time segment where you start. So if you start at 1200Z, or 1500Z (thus the middle of a 3 hour segment), it should be more accurate. (I think it is more accurate in premium. ) It would be interesting to test the accuracy, depending on the start hour.
-
@rittels
Here starting at 1600Z and with 1h forecast step, it does not improve anything.
At boat position the wind is ENE, but shown as S wind in the Route planner.
-
@idefix37 Hello, I have reported the issue, we will look into it.
-
@Korina
Thank you !
That was the reason of the misunderstanding with @viatormarine until I checked the Route planner and see this recent issue. Up to now it was perfect. -
Now wind on map and on Route planner are matching again at 340NM on a 576NM trip.
Thanks to @marekd
https://community.windy.com/topic/9013/windy-launches-route-planner/165 -
Is there a way to use an uploaded .gpx route in the Distance & Planning feature of Windy? I can see the route on the map quite clearly when I upload it but the Distance & Planning feature does not seem to recognize it as the subject for which I would like meteorological data. Is there a way to connect these two features and make them work together?
-
@FairwaterMarine
Not yet, hope it will be possible in near future:
https://community.windy.com/topic/12839/inactive-route-plan-mode/2?_=1603915968125 -
@idefix37 how to see VFR and IFR inside the APP on ipad please?
-
@ericdozi
Could you be more explicit in your question? I understand that you want to get the Route planner available in the mobile app, right?
You have seen in previous posts here above that this feature is only available with the browser version on desktop. With the mobile app (on tablets or mobile phones) you have only the Distance & planning tool.
You have posted 10 messages on the same subject within one hour. Are you trolling us?
