A new update was just released by meteobridge that addressed this issue and should work with both the galfert's HTTP or meteobridges Weather Network method

Andy

I said Go to your Windy page. Mine is as an example. Look for your Windy ID along with your "lat-long or log" in and enter it after /pws- https://www.windy.com/station/pws-f075a2d9"

You do not have to include your Lat-Long. https://www.windy.com/station/pws-f075a2d9

Andy

Hmmm seems my signature line is not working.

Just letting everyone know I finally got my Windy working with galfert's help. We abandoned the meteobridge "Weather Network" method in favor of his HTTP with a few mods to what I was using. If you still need help get a hold of him but I will post his method here.

Follow these steps.Remember this is for Imperial and not metric. You will need to change this to suite you.

Go to Services tab on the Meteobridge
Click on the Select Service drop down and select HTTP Request
Click on Select Event Type drop down and select Periodical
Click on Add Service Event button
You'll now see new fields to fill in above for HTTP under Event Definition section
Change frequency to Every 5 minutes
Set Retry to 2 Retries
Copy and Paste the following URL:

https://stations.windy.com/pws/update/XXX- Your very, very, very long Windy-API-Key goes here-XXX?winddir=[wind0dir-avg2]&windspeedmph=[wind0wind-avg2=mph]&windgustmph=[wind0wind-max10=mph]&tempf=[th0temp-avg5=F]&rainin=[rain0total-sum60=in.2]&baromin=[thb0seapress-min1=inHg.2]&dewptf=[th0dew-avg1=F]&humidity=[th0hum-avg1]&uv=[uv0index-avg5]

Remember to keep the "?" at the end of the API key -XXX?

Fill in Success: SUCCESS "In Caps as shown"
Click on the Save button at the bottom
***Don't forget to disable the Windy upload in the "Weather Network" tab***

Go you your Windy page. Mine is as an example. Look for your Windy ID along with your lat-long or log in and enter it after /pws- https://www.windy.com/station/pws-f075a2d9

All credit goes to "Galfert" Many many thanks to Galfert for getting me up.

I am sure a fix is coming for those with the Meteobridge.

Andy

Hello all!!!

Without having read through the tread I am informing everyone with a meteobridge device that Boris at meteobridge has successfully added Windy to the newest update and it works just fine. To add the fix just reboot your meteobridge, wait for it to boot up then go into Weather Networks section "Add more Weather Networks" at the bottom and your API key and it will work. Take care and enjoy. To Windy.... Thank you so much for your efforts.

Andy @ https://www.nicomaparkwx.com

The owner of MeteoBridge (Boris) is in work adding windy to it's lineup of feeding weather sites. The last message I read there says he is working on finalizing the upload method. Should be any day now if your a Meteobridge owner www.meteobridge.com

Andy

1. Yes I would be more than willing to provide you my weather data since I already use your free Windy.com maps on my site... https://www.nicomaparkwx.com

2. Yes I provide my weather data to approx 7-9 sites now.

3. I use meteobridge Ver.3.9, The format is taken care of by meteobridge.com so I would advise getting in touch with them to help with your reporting setup.

4. For me it is fine the way you show your map. I also would like a setting to open the radar view with a zoom level. Please see my site above.

5. Yes I pretty much do that now so no problem.

Best regards.

Andy