Would be nice if the pressure selection would keep its setting and that the value is shown inside the "screen" area.

Regards
Dirk

Data source: AIP Norway https://ais.avinor.no/no/AIP/View/44/aip/EN_ENR_2_2_en.pdf#page=6
Left a comment at Ourairports as well.

Hi,

in 2019 I wrote this entry: "North Sea offshore installations, old data."
Where is the data derived from as there has been even more changes, new and removed stations. The UK sector is missing completely.

Regards
Dirk

Hi,

In the North Sea Ekofisk area some old installations can be removed and 3 are missing on the "Airports" layer.

Removed installations are:

ENXC Cod, ENXS Albuskjell A, ENXF Albuskjell F, ENXD Ekofisk D, ENXE Edda and ENVH Valhall A

Missing installations are:

ENLA - Ula N57 06,70 E002 50,80
ENXI - Valhall Flank North N56 19,40 E003 21,10
ENWV - Valhall PH N56 16,48 E003 23,59

Any chance to get the UK sector offshore installations displayed on the "Airports" layer.

Regards from Valhall
Dirk

Hi,

Would it be possible to add a sounding forecast zoom level 0 to 2000ft?

Regards from Valhall area in the North Sea.
Dirk

When refreshing the site it is ok and when the slider is moved very slowly it seems to calculate ok, but when done in normal speed the Zulu time refresh gets stuck.

Timezone here is GMT+1.
I did some more testing and it seems that the Zulu time is correct when updating the site but it is not correct calculated when moving the time slider.

getting worse when using the time slider

Location Valhall

Hi,

The displayed ZULU Time seems to have summertime included, 2h difference, should only be 1h. (Valhall, North Sea)

Regards
Dirk

Data source: AIP Norway https://ais.avinor.no/no/AIP/View/44/aip/EN_ENR_2_2_en.pdf#page=6
Left a comment at Ourairports as well.

correct position would be N 57 06.70 E002 50.80

Regards
Dirk

Would be nice if the pressure selection would keep its setting and that the value is shown inside the "screen" area.

Regards
Dirk