@Suty Is there any plans to merge Windy and Meteoblue subscription to one? Or at least provide discounts for users of one service for the other?

Any plans to add ARPEGE model which better covers Mediterranean Sea.

It seems that GRIB files should be free, similar to AROME that is already supported in Windy.

@Ftjwinfs I would also like to understand why this very useful use case (inspecting various locations on map) is not supported anymore.

I am also a sailor and have exactly the same needs: explore options on a map to find better route or anchorage for the night.

The new "Move the map to change the forecast location" is not a replacement for the old feature that we all loved.

@idefix37 good point, ecmwf in windy is same resolution as arpegè, however I find arpegè (and derived models like aladin) better for sail navigation. Windy's great UX would be great with arpegè

@idefix37 It is the same in Slovenian: mrtvo morje

@idefix37 yes, I know that and it works for me. It is just confusing that I need to explain this and where to find the option to every friend that I have persuaded that Windy Premium is worth their money...

@William-Krukowski This is very easy if you have Signal K on your boat network.

I have Victron Cerbo GX to monitor my boat electrical system and it has special Large firmware which includes Signal K open source software.

What I did:

• connect Cerbo GX to Garmin NMEA2000 via VE-Can to NMEA2000 cable
• install Large firmware on Cerbo, enable Signal K
• I have my Garmin network always on (I just turn off all GMI displays and plotters with power off key): this provides me heading, wind, depth and AIS data on NMEA 2000 network
• On Signal K I had to
  • install Signal K Windy plugin
  • install Derived Data plugin to calculate wind.directionGround
    (from boat heading and wind angle)

And now I have my own windy station and I always know exact situation on my boat from Windy.

@Ondřej-Šutera yep, it was a delay. Thanks for clarification.
Updated just now:

I have setup Windy station on my boat with Signal K Windy plugin. It uses my Garmin boat instruments and Ruuvi sensors for the data.
https://www.windy.com/station/pws-f06efc48?44.666,13.653,8

When I am underway, station location is properly shown on boat location on Windy map.

However, when I inspect historical data, it does not show the location of the measurement on the map - it leaves the point on the current location in my home port.

Can this be fixed as this data is misleading for Windy stations on movable vehicles like boats.

@idefix37 Thanks for clarification, maybe they should be marked differently in the header to reduce confusion with meteogram (where there is no interpolation)? Or add interpolated values also there to make it consistent?

I found link in Windy app on Android and it seems Quatix 5 watch is not supported?
What is the reason, this watch is not supported?
It is very unfortunate as many sailors use Quatix watches and would appreciate windy weather info on their watch.

@Nicole-Dolezalova yes, I am also moving away from Navionics. I recently started to use Orca app (getorca.com), but map coverage is not as good.

I was really excited about recent Windy update news, even more with app for Garmin watches.

I have checked in Connect IQ app, but it did not find "windy" app.
I have Garmin Quatix 5 app that I use for sail races and would be great to also have weather info on the watch.

Regards,
Luka

No Quatix 5 support?

I am providing weather data from my boat as Windy Station.
I use signalk-windy-plugin that uploads my boat data to Windy PWS.

Would it be possible to add support for Windy Stations for embedding (iframe) via https://embed.windy.com?

I would like to add my windy station data to my dashboard on the boat.

@Suty Is there any plans to merge Windy and Meteoblue subscription to one? Or at least provide discounts for users of one service for the other?

Is there any good reason why route planner does not support other models than ECMWF?

And additional question: I am also sending 'pressure' in Pa to Windy, but it does not show in Windy.

@William-Krukowski This is very easy if you have Signal K on your boat network.

I have Victron Cerbo GX to monitor my boat electrical system and it has special Large firmware which includes Signal K open source software.

What I did:

• connect Cerbo GX to Garmin NMEA2000 via VE-Can to NMEA2000 cable
• install Large firmware on Cerbo, enable Signal K
• I have my Garmin network always on (I just turn off all GMI displays and plotters with power off key): this provides me heading, wind, depth and AIS data on NMEA 2000 network
• On Signal K I had to
  • install Signal K Windy plugin
  • install Derived Data plugin to calculate wind.directionGround
    (from boat heading and wind angle)

And now I have my own windy station and I always know exact situation on my boat from Windy.

I have setup Windy station on my boat with Signal K Windy plugin. It uses my Garmin boat instruments and Ruuvi sensors for the data.
https://www.windy.com/station/pws-f06efc48?44.666,13.653,8

When I am underway, station location is properly shown on boat location on Windy map.

However, when I inspect historical data, it does not show the location of the measurement on the map - it leaves the point on the current location in my home port.

Can this be fixed as this data is misleading for Windy stations on movable vehicles like boats.