@redeye64 I would try using a Station ID of 0 or 1 and see if one of those works. Let me know if you get this working, as I am having the same issue as you. Thank you!

@marekd Thank you reviewing. Just to confirm, are you saying that I am using API v1 because my data is being sent to https://stations.windy.com/pws/update/ instead of https://stations.windy.com/api/v2/pws ?

Per the API Reference:

This is a new API, effective from January 2026.

If you are currently using a previous (legacy) version of the API, please note that it is no longer supported. The legacy API will remain operational only until the end of 2026, after which it will be fully shut down.

Although the previous API is no longer supported, shouldn't it still function until the end of this year?

@Suty I provided a sample debug from my WiFiLogger 2 in my last post. I don't think I am receiving anything back from Windy.com.

@Suty Thank you for your reply and referring me to that related topic. It sounds like @caymanislands and I are experiencing the same issue.

Here is sample debug from my WiFiLogger 2 when it sends data to Windy.com

Windy 5
[RTD]
https://stations.windy.com/pws/update/?si=0&ts=1778528099&windspeedmph=002.7&winddir=63.0&windgustmph=008.0&tempf=050.7&rh=038&baromin=30.250&dewpoint=-03.3&rainin=00.00
HTTPS connection time: 22302230

Do you see anything wrong with this data?

I have a Davis Vantage Pro2 with a WiFiLogger 2 running firmware version 2.43. I am trying to get my station data to send to Windy.com. Here are the steps I have followed:

Created Windy.com account
Created Windy.com station
In WiFiLogger 2 > Setup > Data Export Setup, configured Windy.com export settings section as follows:

Mode: Enable
API Key: (from Windy.com > Stations > Edit Stations > Connection)
Station ID: 1 (also tried 0)

Saved export settings

When I view my Windy.com station the status is Offline. How do I get my WiFiLogger 2 working with Windy.com?

Thank you in advance!