Hi there!

Right now, you can set a minimum amount of rain for your alerts.
Can we have a maximum amount, too? A lot of weather dependent outdoor activities like it dry, e.g. paragliding ridge soaring, where I need wind x from y with 0 rain.

Thanks :)
And of course thanks for this awesome service!

Du kannst das Farbschema in den Einstellungen anpassen. Hab zum Beispiel alles oberhalb 30 km/h rot, weil ich dann nicht mehr fliegen gehen kann und es mich dann einfach nicht mehr interessiert.

That would be pretty cool.

.csv will only be useful for power users. Why not use a more common format, like .gpx or .kml?
They are understood by most tools, and power users can still have gpsbabel convert it to .csv or whatever format they need.

Du kannst das Farbschema in den Einstellungen anpassen. Hab zum Beispiel alles oberhalb 30 km/h rot, weil ich dann nicht mehr fliegen gehen kann und es mich dann einfach nicht mehr interessiert.

@ivo please make this banner 80% of the screen for @D-Saludaga thanks.

@raffaello-dimartino Not sure if you need to convert pressure because windy already has 3 things:

• Your station's altitude
• Your station's pressure
• The knowledge that most people won't be as considerate and will just send the raw pressure

So windy will do these calculations for you after you send them :)

@raffaello-dimartino Buit can't you just tell windy it's in pascal? You don't need to do any conversions. Try

"pressure":"{pressure}"

and

"temp":"{temperature}",

@raffaello-dimartino
You can check if data arrives at https://stations.windy.com/pws/station/open/replace_with_api_Key/f05b0b61

Install https://chrome.google.com/webstore/detail/json-viewer/gbmdgpbipfallnflgajpaliibnhdgobh?hl=en or similar to make it readable.

I just did that. Data does arrive, but some of it seems off: temperature (413.844458007812 kelvin) and 338046000 pressure (that's 3.3 megapascal) are too high.

temp instead of tempf (f=fahrenheit) and pressure instead of baromin will probably fix that.

Rest looks fine.

Don't worry about the link not working and the station not showing up yet, that's normal. It will work after 36 hours or so when windy fetches new stations.

@raffaello-dimartino There's a parameters names / units reference on https://community.windy.com/topic/8168/report-your-weather-station-data-to-windy/2 just below the json example.

Checked your github, you obviuously know that yourself, sorry for even asking this :)

@raffaello-dimartino I don't have a wunderground so I can test. Does the json you tried work in https://jsonformatter.curiousconcept.com/ ? (Replace the placeholders with example values for checking)

Addendum: Also check https://stations.windy.com/pws/station/(your_key)/0 to see if the data arrives

@raffaello-dimartino @ltrullem This doesn't look like you need the developers. I'm pretty sure this setting will work:

• Get an API key on https://stations.windy.com/stations and set up a station there.

• Fill in the wunderground settings as in the picture, building a json string as shown on https://community.windy.com/topic/8168/report-your-weather-station-data-to-windy/2 section B/ POST JSON

• Save and wait for 48 hours, the station should appear on windy by then.