Google just dropped this: https://deepmind.google/technologies/weathernext/

Just to update, this seems to be a lot better now!

It would be highly beneficial to have the option to define a preset of units that can be switched effortlessly. While I primarily use the metric system for weather information, despite being in the US, conversing with locals who are unfamiliar with the international system necessitates frequent adjustments of units. Having a toggle button for quick switching between systems would greatly enhance convenience.

Just to update, this seems to be a lot better now!

@Suty That what I thought, but then, it seems to display nearby station way farther than what I initially reported. (as illustrated by red arrow.)

It seems like it is a bit inconsistent considering my first report shows the case where station practically is in its back yard. (the one showing 33 degrees.)

(And I believe these stations were visible before.)

I have noticed that in some places, the nearest weather observations are not showing up. A particularly notable example is Tokyo. If you click on the area, none of the nearby weather stations are displayed, even though there are multiple stations in the vicinity. It only shows air quality stations.

Google just dropped this: https://deepmind.google/technologies/weathernext/

@Suty Great to hear! Thank you!

In the Windy Android app (version 41.2.3), the MSM weather model is not available for selection despite being accessible in the web version. This issue occurs when trying to select a weather model while viewing Japan on the map.

Steps to Reproduce:

1. Open the Windy app on an Android device.
2. Navigate to Japan on the map interface.
3. Tap on the option to select a weather model.
4. Observe that the MSM model is not listed among the available models.

Expected Result:
The MSM model should be listed and selectable along with other models when viewing Japan.

Actual Result:
The MSM model is absent from the list of available models in the app, although it is present in the web version.

It would be highly beneficial to have the option to define a preset of units that can be switched effortlessly. While I primarily use the metric system for weather information, despite being in the US, conversing with locals who are unfamiliar with the international system necessitates frequent adjustments of units. Having a toggle button for quick switching between systems would greatly enhance convenience.

I'm seeing same type of issue, but in a form of weird tiling. (in case of temp layer...)

Less severe (but very misleading) tiling issue are shown in Wind speed layer, too.

This was observed in Firefox 62.0.2 under Linux.